ONKYO HT-RC360 사용자 설명서

En

With 

u (Remote Interactive), you can use the following 

special functions:

■

System On/Auto Power On
When you start playback on a component connected via 
u while the AV receiver is on Standby, the AV 
receiver will automatically turn on and select that 
component as the input source.

■

Direct Change
When playback is started on a component connected via 
u, the AV receiver automatically selects that 
component as the input source.

■

Remote Control
You can use the AV receiver’s remote controller to 
control your other 

u-capable Onkyo components, 

pointing the remote controller at the AV receiver’s 
remote control sensor instead of the component. You 
must enter the appropriate remote control code first 
(

• Use  only 

u cables for u connections. u cables are supplied 

with Onkyo components.

• Some components have two 

u jacks. You can connect either 

one to the AV receiver. The other jack is for connecting 

additional 

u-capable components.

• Connect only Onkyo components to 

u jacks. Connecting other 

manufacturer’s components may cause a malfunction.

• Some components may not support all 

u functions. Refer to 

the manuals supplied with your Onkyo components.

• While Zone 2 is on, the System On/Auto Power On and Direct 

Change 

u functions do not work.

See “Recording” for details on recording (

page 39).

• The AV receiver must be turned on for recording. Recording is 

not possible while it’s in standby mode.

• If you want to record directly from your TV or playback VCR to 

the recording VCR without going through the AV receiver, 
connect the TV/VCR’s audio and video outputs directly to the 
recording VCR’s audio and video inputs. See the manuals 
supplied with your TV and VCR for details.

• Video signals connected to composite video inputs can be 

recorded only via composite video outputs. For example, if your 
TV/VCR is connected to a composite video input, the recording 
VCR must be connected to a composite video output.

• The surround sound and DSP listening modes cannot be 

recorded.

• Copy-protected Blu-ray Discs and DVDs cannot be recorded.
• Sources connected to a digital input cannot be recorded. Only 

analog inputs can be recorded.

• DTS signals will be recorded as noise, so don’t attempt analog 

recording of DTS CDs or LDs.

• (Chinese models) While the listening mode is set to Pure Audio, 

the video circuitry is turned off and therefore no video signals 
are processed. If you want to make recordings, select another 
listening mode.

u Components

F

page 17).

u connection (see the illustration).

e.g., CD player

RI Dock

VCR, DVD recorder, 

cassette tape deck, 

CDR, MD recorder, etc.