ONKYO HT-RC360 사용자 설명서

En

You can specify the output resolution for the HDMI OUT 
and have the AV receiver upconvert the picture resolution 
as necessary to match the resolution supported by your 
TV.

■

`

Through:

Select this to pass video through the AV receiver at 
the same resolution and with no conversion.

`

Auto:

Select this to have the AV receiver automatically 
convert video at resolutions supported by your TV.

`

480p (480p/576p), 720p, 1080i, 1080p

Select the desired output resolution.

`

1080p/24:

Select this for 1080p output at 24 frames per second.

`

4K Upscaling:

Select this for an output resolution four times that of 
1080p, resulting in 3840 × 2160 pixels.

• Depending on the incoming video signal, the video playback 

may not be smooth or the vertical resolution may be lowered. In 
this case select anything other than “1080p/24”.

If you connect a video component to an HDMI input, you 
must assign that input to an input selector. For example, if 
you connect your Blu-ray Disc/DVD player to HDMI 
IN 2, you must assign “HDMI2” to the “BD/DVD” input 
selector.
If you’ve connected your TV to the AV receiver with an 
HDMI cable, composite video and component video 
sources can be upconverted

*

 to HDMI. See “Video 

Connection Formats” for more information on video 
signal flow and upconversion (

page 77).

Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, TV/CD, 
PORT

`

HDMI1, HDMI2, HDMI3, HDMI4, HDMI5:

Select a corresponding HDMI input to which the 
video component has been connected.

`

- - - - -:

Select this to output composite video and component 
video sources from the HDMI OUT. The video 
signal from the HDMI output is configured in 
“Component Video Input” (

page 42). 

Each HDMI input cannot be assigned to two input 
selectors or more. When HDMI1 - HDMI5 have already 
been assigned, you must first set any unused input 
selectors to “- - - - -” or you will be unable to assign 
HDMI1 - HDMI5 to other input selectors.

• When an HDMI IN is assigned to an input selector as explained 

here, the same HDMI IN will be set as a priority in the “Digital 
Audio Input” (

page 42). In this case, if you want to use the 

coaxial or optical audio input, make the appropriate selection in 
the “Audio Selector” setting (

• The  “TUNER” selector cannot be assigned and is fixed at the 

“- - - - -” option.

• “AUX” is used only for input from the front panel.
• Do not assign an HDMI IN to the TV/CD selector while “HDMI 

Control (RIHD)” is set to “On” (

page 52), otherwise 

appropriate CEC (Consumer Electronics Control) operation will 
not be guaranteed.

• If you assign “- - - - -” to an input selector that is currently 

selected in “HDMI Through” (

page 53), the “HDMI 

Through” setting will be automatically switched to “Off”.

• If you connect a component (such as UP-A1 Dock with docked 

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot 
assign any input to the “PORT” selector.

Composite video, 

component video

Composite video, 

component video

HDMI

HDMI

FRONT (Fixed)