Marantz SR6001 사용자 설명서

Multi Room output can be operated from a room 
where the receiver is not installed. This requires a 
separately sold IR receiver. (For connections, see 
page 24.)

 

 Press 

MULTI on the multi room remote control 

from the MULTI ROOM.

  (Press 

the 

AMP button fi rst to enter the AMP 

mode then press the MULTI button.)

 

  This operations will put the SR6001 into multi 

room mode and “MULTI” will be illuminated on 
the display.

 

 Press 

the 

VOLUME+ or VOLUME− button on 

the multi room remote control to set the desired 
volume.

 

  In multi room mode, the multi room remote 

control can be used in the multiroom to operate 
the following functions.

Controlling volume level, sleep timer, and muting. 
SeIecting input audio and video source.

Selecting band, controlling preset channel up and 
down, tuning up and down direct frequency call.

• The MULTI ROOM OUT (MULTI OUT/MULTI 

SPEAKER) has analog outputs.

  This does not support digital input signals.

•  If the Tuner (FM or AM) is active in the main room, 

you can not control any function of the tuner.In this 
case, You must listen to the same station as the main 
room.

•  When the component with RC-5 bus is connected to 

the MULTI RC IN jack(see page 24), Multiroom can 
be operated using the RC codes for the main room. 
The remote control units of other Marantz products 
can also be used to control multiroom.

SR6001U DFU_1_ENG 4_4.indd   61

SR6001U DFU_1_ENG 4_4.indd   61

06.12.21   4:16:10 PM

06.12.21   4:16:10 PM