Russound CAM6.6T 사용자 설명서

18

On the UNO-S2 keypad, press 

to select the

AM/FM tuner by choosing the tuner’s preas-

signed source number (1).

Push 

to toggle between AM band and FM

band reception.

Use

and 

for manual tuning. The fre-

quency will appear on the keypad and the active

tuner. To move quickly through the stations,

press and hold either

or 

for more than

1.5 seconds

.

A press on

will seek the next higher tune-

able station. If a tuneable station is not found,

end the SEEK function by pressing

again.

To scan, press and hold then release 

. The

tuner scans through tuned stations with a 5-sec-

ond preview before moving to the next station.

To end scanning, press

again.

The AM/FM tuner can store up to 36 favorites,

or memory presets. These are stored in groups

of six called banks, and there are six banks.

Each preset and each bank can be given a cus-

tom name of your choice.

To select a bank, press and hold 

for bank

up or 

for bank down. The bank’s name will

be temporarily displayed on the UNO-S2. Banks

and memory presets are custom-named in the

Peripheral Setup Menu (see Installation Menu

section of this manual). 

The SRC2 remote control is used to set memory

presets for all six banks. See page 22 for

details. 

Press

and 

to scroll through the memo-

ry presets for the selected bank. This procedure

will step through all of the presets in the current

bank, then loop back to start at the first one.

Only configured presets will be displayed.

Press 

to mute/unmute the tuner audio output.