Pioneer VSX-520 사용자 가이드
Listening to your system
04
36
En
Choosing the input signal
On this receiver, it is possible to switch the
input signals for the different inputs as
described below.
input signals for the different inputs as
described below.
1
1
Press
on the remote control.
2
Press SIGNAL SEL to select the input
signal corresponding to the source
component.
When
component.
When
DIGITAL (C1/O1/O2) or HDMI (H) is
selected and the selected audio input is not
provided,
provided,
A (analog) is automatically selected.
Each press cycles through the following:
•
A – Selects the analog inputs.
•
DIGITAL – Selects the digital input. The
coaxial 1 input is selected for
coaxial 1 input is selected for
C1, and the
optical 1 or 2 audio input is selected for
O1 or O2.
O1 or O2.
•
HDMI – Selects an HDMI signal. H can be
selected for BD, DVD or TV/SAT input. For
other inputs,
selected for BD, DVD or TV/SAT input. For
other inputs,
HDMI cannot be selected.
2
When set to
DIGITAL or HDMI, 2 lights when
a Dolby Digital signal is input, and
DTS lights
when a DTS signal is input.
When the
HDMI is selected, the A and
DIGITAL indicators are off (see page 12).
Using the headphone
•
Insert the headphone into the PHONES
jack.
The sound is heard from the headphone and no
sound is heard from the speakers connected to
this receiver. The listening mode when the
sound is heard from the headphone can be
selected only from
The sound is heard from the headphone and no
sound is heard from the speakers connected to
this receiver. The listening mode when the
sound is heard from the headphone can be
selected only from
STEREO or ALC.
Note
1 • When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and
DTS (including DTS 96 kHz / 24 bit) digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital,
DTS, SACD (DSD 2 ch), PCM (32 kHz to 192 kHz sampling frequencies), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-
HD Master Audio and DVD Audio (including 192 kHz). With other digital signal formats, set to
DTS, SACD (DSD 2 ch), PCM (32 kHz to 192 kHz sampling frequencies), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-
HD Master Audio and DVD Audio (including 192 kHz). With other digital signal formats, set to
A (analog) (TUNER).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make
the proper digital connections (page 22) and set the signal input to
the proper digital connections (page 22) and set the signal input to
C1/O1/O2 (DIGITAL).
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
2 When the
HDMI option in Setting the Audio options on page 33 is set to THRU, the sound will be heard through your TV, not
from this receiver.
RECEIVER
VSX-520_UCSMXCN_En.book 36 ページ ２００９年１２月１５日 火曜日 午後２時３３分