Sony STR-DN850 사용자 설명서
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Method 1: Setting up a wireless network using the WPS push button configuration method
If your wireless LAN router/access point has a WPS button, you can easily connect the receiver to a Wi-Fi (wireless
LAN) network.
If your wireless LAN router has an AOSS button or other easy setup button, it may support WPS. Check the operation
manual of your wireless LAN router/access point for details.
LAN) network.
If your wireless LAN router has an AOSS button or other easy setup button, it may support WPS. Check the operation
manual of your wireless LAN router/access point for details.
1. Select [Settings] - [Network Settings] from the home menu.
2. Select [Internet Settings].
3. Select [Wireless] (*).
The screen for selecting the IP address acquisition method is displayed on the TV screen.
*
You cannot select [Wireless] if a LAN cable is connected to the receiver.
4. Select [WPS Push].
The receiver starts searching for access point, and displays a list of up to 30 available network names (SSIDs).
5. Follow the on-screen instructions, and press the WPS button on the access point.
Message: [Push the WPS button on the access point within 2 minutes.]
WPS button on the wireless LAN router/access point
The receiver starts connecting to the network. For details, refer to the messages that appear on the TV screen.
After the network settings are complete, [ ] lights up on the display panel.
After the network settings are complete, [ ] lights up on the display panel.
Hint
WPS (Wi-Fi Protected Setup) is a standard created by the Wi-Fi Alliance allowing you to set up a wireless network
easily and securely.
See [Information] when checking the network settings.
easily and securely.
See [Information] when checking the network settings.
4-488-938-11(1)
Copyright 2014 Sony Corporation
142