Sony STR-DN850 사용자 설명서
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Method 4: Setting up a network connection by adding a new access point (manual setup method)
You can input the network name (SSID) you want manually if it does not appear on the list.
1. Select [Settings] - [Network Settings] from the home menu.
2. Select [Internet Settings].
3. Select [Wireless] (*).
*
You cannot select [Wireless] if a LAN cable is connected to the receiver.
4. Select [Manual Registration].
5. Select [Direct Input].
6. Enter the network name (SSID) you want using the on-screen keyboard. Press / / / and to select the
characters one by one, then select [Enter].
The name you entered is registered.
The name you entered is registered.
7. Select the security setting you want.
8. Enter the security key (WEP key, WPA/WPA2 key) using the on-screen keyboard. Press / / / and to
select the characters one by one, then select [Enter] to confirm the security key.
The screen for selecting the IP address acquisition method is displayed on the TV screen.
The screen for selecting the IP address acquisition method is displayed on the TV screen.
9. Select [Auto].
10. Select [OK].
The receiver starts connecting to the network. For details, refer to the messages that appear on the TV screen.
After the network settings are complete, [ ] lights up on the display panel.
After the network settings are complete, [ ] lights up on the display panel.
If using a fixed IP address
Select [Manual] in step 9. The IP address input display appears on the TV screen.
Enter the value for [IP Address] using the on-screen keyboard. Press / / / and to select the characters one
by one, then select [Enter] to confirm the value.
Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS], then select [Next].
Enter the value for [IP Address] using the on-screen keyboard. Press / / / and to select the characters one
by one, then select [Enter] to confirm the value.
Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS], then select [Next].
Hint
See [Information] when checking the network settings.
146