Sony STR-DN850 사용자 설명서
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
No image appears on the TV.
Select the appropriate input using the input buttons.
Set your TV to the appropriate input mode.
Move your audio device away from the TV.
Assign the component video input correctly (for STR-DN1050 only).
When you are upconverting input signals using the receiver, use the same type of output signals as input signals (for
STR-DN1050 only).
Make sure that cables are correctly and securely connected to devices.
Some playback devices need to be set up. Refer to the operating instructions supplied with each device.
Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for 1080p, Deep Color
(Deep Colour), 4K or 3D transmission.
The output of the HDMI video signals of the receiver may be set to [HDMI OFF]. In this case,
Set your TV to the appropriate input mode.
Move your audio device away from the TV.
Assign the component video input correctly (for STR-DN1050 only).
When you are upconverting input signals using the receiver, use the same type of output signals as input signals (for
STR-DN1050 only).
Make sure that cables are correctly and securely connected to devices.
Some playback devices need to be set up. Refer to the operating instructions supplied with each device.
Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for 1080p, Deep Color
(Deep Colour), 4K or 3D transmission.
The output of the HDMI video signals of the receiver may be set to [HDMI OFF]. In this case,
set to [HDMI ON] (for STR-DN850 only).
set to [HDMI A], [HDMI B], or [HDMI A + B] (for STR-DN1050 only).
set to [HDMI A], [HDMI B], or [HDMI A + B] (for STR-DN1050 only).
4-488-938-11(1)
Copyright 2014 Sony Corporation
270