Sony STR-DN840 사용자 설명서

다운로드
페이지 128
47
US
Bas
ic O
p
erati
o
n
s
To operate the USB device 
using the remote control
Press USB before you use the following 
buttons.
Notes on the USB device
• Do not remove the USB device during 
operation. To avoid data corruption or 
damage to the USB device, turn the 
receiver off when connecting or 
removing the USB device.
• Do not connect the receiver and the USB 
device through a USB hub.
• When the USB device is connected, 
“Reading” appears.
• It may take about 10 seconds before 
“Reading” appears depending on the type 
of USB device connected.
• When the USB device is connected, the 
receiver reads all the files on the USB 
device. If there are many folders or files 
on the USB device, it may take a long 
time to finish reading the USB device.
• The receiver can recognize up to
– 256 folders (including “ROOT” folder).
– 256 audio files for each folder.
– 8 folder levels (tree structure of files, 
including “ROOT” folder).
The maximum number of audio files and 
folders may vary depending on the file 
and folder structure.
Do not save other types of files or 
unnecessary folders on a USB device.
• Compatibility with all encoding/writing 
softwares, recording devices, and 
recording media cannot be guaranteed. 
Incompatible USB device may produce 
noise or interrupted audio or may not play 
at all.
• Some time may be needed to start 
playback when:
– the folder structure is complex.
– the memory capacity is excessive.
• This receiver does not necessarily 
support all the functions provided in a 
connected USB device.
• The playback order for the receiver may 
differ from the playback order of the 
connected USB device.
• Folders that have no audio files are 
skipped.
• When playing a very long track, some 
operations may cause playback delay.
Press
Operation
N
Starts play.
X
Pauses play.
x
Stops play.
./>
Goes to the previous/next file.
REPEAT
Enters repeat mode.
SHUFFLE
Enters shuffle mode.
N
.
/>
x
X
USB
REPEAT
SHUFFLE