Sony STR-DA7100ES 사용자 설명서

• You can convert only the 480i of component 

video signals into HDMI signals, S-VIDEO 
signals, or VIDEO signals. Signals are 
converted from 480i interlace scanning to 
480p progressive scanning, then the signals 
are output.

• When video or S-video signals from a VCR, 

etc., are converted on this receiver and then 
output to your TV, depending on the status of 
the video signal output, the image on the TV 
screen may appear distorted horizontally or 
no image may be output.

• An HDMI video signal cannot be converted 

to a component signal, an S-video signals 
and video signal.

• REC OUT does not have an up convertion 

function.

• S2 information (aspect information for the 

images) included in  S-video signals is 
effective only when S-video input signals 
are output from the S-video MONITOR 
OUT jack. An aspect ratio of images may 
not be displayed correctly when video 
signals and component video signals are 
converted and are output from the S-video 
MONITOR OUT jack.

• (Models of area code CEL only)

SECAM video signals are converted to PAL 
signals and output when VIDEO CONVERT 
is “ON.” Set VIDEO CONVERT to “OFF,” 
when you output signals in SECAM system.

• Set VIDEO CONVERT to “OFF” when 

receiving a signal that supports Closed 
Captions. If VIDEO CONVERT is set to 
“ON,” you cannot display Closed Captions.

• Only component video input signals of 480i 

are accepted when “PROGRESSIVE OUT” 
is set to “ON.”

Component video input signals and HDMI 
input signals can be assigned to other input 
(page 63, 64, 70).