JVC KD-ABT22 사용자 설명서
ENGLISH
29
SETTINGS
3
Turn the control dial to adjust the
subwoofer output level. [0 to 8]
4
Press number button 1 (
) to
move to another setting level.
4
/
¢
: select the quality of
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
* If “Off” is selected in step
2
, you can only
adjust the subwoofer phase.
C
Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
frequency to the front/rear speakers. Set this
to match the LPF setting.
• Off:
All signals are sent to the front/rear
speakers.
speakers.
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
D
VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
of each source (except FM).
Adjust to match the input level of the FM
sound level.
sound level.
• Before making an adjustment, select the
source you want to adjust.
E
Loudness, [Off or On]
Turn the control dial to select “Off” or
“On.” When “On” is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
“On.” When “On” is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When
preference.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
button 3 or 6.
1
2
• For “EQ” setting, see page 28.
3
Adjust the selected setting item.
A
Fad/Bal (Fader/Balance)
1
Press number button 1 (
)
to move to the “Fad/Bal” adjustment
display.
display.
2
Adjust the speaker output balance by
pressing:
5
/
∞
: between the front and rear
speakers. [F6 to R6]
4
/
¢
: between the left and
right speakers. [L6 to R6]
B
Subwoofer
1
Press number button 1 (
) to
move to the “Subwoofer” adjustment
display.
display.
2
Use
4
/
¢
to select the cutoff
frequency to the subwoofer.
• Off *: All signals are sent to the
subwoofer.
• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
EN24-29_KD-ABT22[J]f.indd 29
EN24-29_KD-ABT22[J]f.indd 29
1/2/08 9:55:38 AM
1/2/08 9:55:38 AM