Sony HT-6500DP 사용자 설명서
Additional Information
53
US
SA-WMSP4 for Subwoofer
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
HARMONIC DISTORTION:
With 6 ohm loads, from 28 – 200 Hz; rated 100
watts, minimum RMS power, with no more
than 0.8% total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).
watts, minimum RMS power, with no more
than 0.8% total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).
Speaker system
Active subwoofer,
magnetically shielded
magnetically shielded
Speaker unit
Woofer: 20 cm cone type
Enclosure type
Acoustically loaded bass
reflex
reflex
Continuous RMS power output
(6 ohms, 20 – 250 Hz)
(6 ohms, 20 – 250 Hz)
100 W
Reproduction frequency range
28Hz – 200 Hz
High frequency cut-off frequency
150 Hz
Input
LINE IN (input pin jacks)
continued
Power requirements
120V AC, 60Hz
Power consumption
100 W
Dimensions (w/h/d)
Approx. 10 3/4
× 12 7/8 ×
16 inches including front
panel
panel
Mass
22 lb 1 oz
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Speaker connecting cord, long (2)
Speaker connecting cord, short (3)
Monaural connecting cord (1 phono to 1 phono) (1)
Coaxial digital cord (1)
Foot pads (speakers) (20)
Foot pads (subwoofer) (4)
Remote commander (1)
FM wire antenna (1)
AM loop antenna (1)
Speaker connecting cord, long (2)
Speaker connecting cord, short (3)
Monaural connecting cord (1 phono to 1 phono) (1)
Coaxial digital cord (1)
Foot pads (speakers) (20)
Foot pads (subwoofer) (4)
Remote commander (1)
• RM-PP411 (HT-6500DP and HT-5500D)
• RM-U306 (HT-1700D)
• RM-U306 (HT-1700D)
R6 (size -AA) batteries (2)
Speakers
Speakers
• Front speakers (2)
• Surround speakers (2)
• Center speaker (1)
• Subwoofer (1)
• Surround speakers (2)
• Center speaker (1)
• Subwoofer (1)
For details on the area code of the component you
are using, see page 4.
are using, see page 4.
Design and specifications are subject to change
without notice.
without notice.