Russound CAV6.6 사용자 설명서

12

Press and release 

to turn on the UNO

System Keypad. This also turns on the corre-

sponding CAV6.6’s room, and any presets previ-

ously assigned will be activated, including set-

tings for bass, volume, last source selected,

etc. Press and release 

to turn off the UNO

System Keypad. This will also put the corresponding

CAV6.6’s room into a standby state. 

An “All On” command is issued by pressing 

and holding for 3 seconds, after an initial room

has been turned on. An “All Off” command can

be issued to all rooms by pressing and holding

after the room has been turned off.

When the room is off, but the system is on in

another room, 

is illuminated by a green

backlight and the "SYS ON" icon remains visible.

scrolls through the six A/V source inputs

and the Aux source. To change sources, press

and release 

. As the sources are sequentially

selected, each source's name appears on the

keypad LCD panel. When a source is selected in

more than one room, the “SHARED” icon will

appear on all UNO Keypads using that source.

is also used to enter the User Menu with a

press and hold action. (See next page for User

Menu)

The room’s audio output is adjusted using  

.  

The 

and 

buttons are user favorite pre-

sets. These presets can be selected at any time

to recall source selection, volume, and favorite

channel, disk, etc. To store a favorite preset: first,

adjust the room settings and select a source to be

stored. Next, press and hold the desired 

or

button until SAVED is displayed on the LCD

panel. Now a press and release of the button will

recall the favorite preset. To set a favorite num-

bered disk or channel, use 

or 

to select a

disk or channel (e.g., channel 45). Wait for the

keypad to show the source name, then press

and hold the F1 or F2 within 15 seconds of set-

ting the numeric selection to save the setting. 

The command keys allow control of the selected

source at the UNO Keypad. The command keys are

activated with a press and release, or press and

hold to access secondary functions.