Russound CAV6.6 사용자 설명서

22

OS UPDATE PORT- Connection for programming
cable used to update UNO keypad OS software. 

SETUP BUTTON - Activates Installer Setup mode
and accesses update menus

RESET BUTTON - Resets UNO-TS2 after update

OS UPDATE/RUN JUMPER - Pins are jumpered
during OS update, and removed during normal
operation.

Software Update 
If a keypad update is released, it will be available
online at 

www.russound.com through the Document

Center, under RNET Systems. Before starting the
update procedure, download updates to a PC and con-
nect the correct programming cable from the PC to
the OS update port on the front of the keypad.

Required Russound Cable for Programming
UNO-S2, UNO-TS2 
- use Programming Cable P/N 2500-121036 
UNO-S1
- use Advanced Programming Cable P/N 2500-521065
(Do not put RS-232 level signals into the pins)