Russound CAV6.6 사용자 설명서
A-BUS products can easily expand the CAV6.6
audio system by adding A-BUS Ready Sub-zones
to the first four CAV6.6 zones. The A-BUS Ready
Sub-zones are located on the back of the
CAV6.6 at the bottom left corner. The A-BUS
Ready Sub-zones are powered by a 24VDC
power supply such as the A-PS.
audio system by adding A-BUS Ready Sub-zones
to the first four CAV6.6 zones. The A-BUS Ready
Sub-zones are located on the back of the
CAV6.6 at the bottom left corner. The A-BUS
Ready Sub-zones are powered by a 24VDC
power supply such as the A-PS.
Use an RJ-45 CAT-5 T568A configuration patch
cable to connect the A-BUS Ready Sub-zone
cable to connect the A-BUS Ready Sub-zone
port to an RJ-45 wall plate (optional) for a clean
installation. Using the same T568A RJ-45 wiring
configuration, attach CAT-5 from the RJ-45 wall
plate to an A-BUS hub or amplified control mod-
ule such as the A-KP2 keypad.
installation. Using the same T568A RJ-45 wiring
configuration, attach CAT-5 from the RJ-45 wall
plate to an A-BUS hub or amplified control mod-
ule such as the A-KP2 keypad.
If using an A-BUS hub with the A-BUS Ready Sub-
zone, the hub should be located near the
CAV6.6 and wired directly instead of first going
through the wall plate.
zone, the hub should be located near the
CAV6.6 and wired directly instead of first going
through the wall plate.
INSTALLER
MAKING CONNECTIONS
A-BUS Ready Sub-zone Connection
34