Russound CAV6.6 사용자 설명서
90
Home Theater systems can share sources with
a CAV6.6 Controller to provide additional listen-
ing and viewing options. In this configuration,
the Home Theater Receiver provides a 12VDC
signal to the CAV6.6 at the Home Theater
12VDC In Port. The 12VDC signal tells the con-
troller to leave any shared home theater source
equipment powered when all CAV6.6 zones are
off, temporarily bypassing the source power
management feature. The 12VDC connected to
the CAV6.6’s Home Theater trigger allows the
source equipment to be left on.
a CAV6.6 Controller to provide additional listen-
ing and viewing options. In this configuration,
the Home Theater Receiver provides a 12VDC
signal to the CAV6.6 at the Home Theater
12VDC In Port. The 12VDC signal tells the con-
troller to leave any shared home theater source
equipment powered when all CAV6.6 zones are
off, temporarily bypassing the source power
management feature. The 12VDC connected to
the CAV6.6’s Home Theater trigger allows the
source equipment to be left on.
Source Components
In this configuration, three audio source compo-
nents are used of a possible six audio/video
source inputs. The source components are con-
nected using quality RCA cables to the first
three inputs.
In this configuration, three audio source compo-
nents are used of a possible six audio/video
source inputs. The source components are con-
nected using quality RCA cables to the first
three inputs.
Source Loop Outputs
The Source Loop Outputs are connected to the
CAV6.6 and to the Home Theater Receiver
source inputs using RCA cables. This enables
the source equipment to be shared between the
two components.
The Source Loop Outputs are connected to the
CAV6.6 and to the Home Theater Receiver
source inputs using RCA cables. This enables
the source equipment to be shared between the
two components.
Keypads
Three UNO-S2 Keypads are connected to the
CAV6.6 Controller using the CAT-5 T568A RJ-45
wiring configuration. This gives complete control
of each of the three zones to the corresponding
UNO-S2 Keypad.
Three UNO-S2 Keypads are connected to the
CAV6.6 Controller using the CAT-5 T568A RJ-45
wiring configuration. This gives complete control
of each of the three zones to the corresponding
UNO-S2 Keypad.
Front Left and Right Speakers
Zone 1 uses the same pair of speakers as the
Home Theater front main left and right speak-
ers. The amplified output from zone 1 connects
to the input on the back of the SRM-2.1 speaker
relay module. The Home Theater left and right
front main speaker outputs are connected to the
input on the front of the SRM-2.1. Zone 1 12V
Trigger output is connected to the 12V +/- on
the back of the SRM-2.1. When zone 1 is pow-
ered on, the SRM-2.1 is triggered allowing audio
from zone 1 of the CAV6.6 to power the speak-
ers. When the UNO System Keypad for zone 1
is shut off, 12VDC is no longer provided to the
SRM-2.1, and the output of the SRM-2.1 is
switched to the Home Theater front left and
right amplified speaker output.
Zone 1 uses the same pair of speakers as the
Home Theater front main left and right speak-
ers. The amplified output from zone 1 connects
to the input on the back of the SRM-2.1 speaker
relay module. The Home Theater left and right
front main speaker outputs are connected to the
input on the front of the SRM-2.1. Zone 1 12V
Trigger output is connected to the 12V +/- on
the back of the SRM-2.1. When zone 1 is pow-
ered on, the SRM-2.1 is triggered allowing audio
from zone 1 of the CAV6.6 to power the speak-
ers. When the UNO System Keypad for zone 1
is shut off, 12VDC is no longer provided to the
SRM-2.1, and the output of the SRM-2.1 is
switched to the Home Theater front left and
right amplified speaker output.
SAMPLE SYSTEM CONFIGURATION 6
Home Theater
Components List:
1 - CAV6.6 Controller
3 - UNO-S2 Keypads
1 - SRM-2.1 Speaker Relay Module
1 - pair Advantage Iso-Mount Speakers
1 - 846C 12VDC Power Supply
3 - 845.1 Micro Emitters