Krell Industries Evolution One 사용자 설명서

Evolution One Monaural Power Amplifier Owner’s Reference, v05.0

Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA

TEL 203-799-9954
FAX 203-891-2028
E-MAIL krell@krellonline.com
WEBSITE http://www.krellonline.com

This product complies with the EMC directive (89/336/EEC) and the low-voltage directive
(73/23/EEC).

WARNINGS

The amplifier must be placed on a firm, level surface where it is not exposed to dripping or splash-
ing.

The ventilation grids on the top of the amplifier and the space underneath the amplifier must be
unobstructed at all times during operation. Do not place flammable material above or beneath the
amplifier.

Before making connections to the amplifier, ensure that the back panel power switch is down.
Make sure all cable terminations are of the highest quality, free from frayed ends, short circuits,
or cold solder joints.

The differential circuitry employed with an Evolution One Monaural Power Amplifier requires special
attention when connecting speakers. Do not connect the negative speaker terminals together. Do
not connect the negative speaker terminals to ground.

Do not connect an Evolution One Monaural Power Amplifier to a loudspeaker selector device that
employs a common ground scheme, as it may short-circuit the amplifier output.

THERE ARE NO USER SERVICEABLE PARTS INSIDE AN EVOLUTION ONE MONAURAL POWER
AMPLIFIER.

Please contact Krell if you have questions not addressed in this guide.

This product is manufactured in the United States of America. Krell

is a registered trademark of Krell Industries, Inc., and is restricted for use

by Krell Industries, Inc., its subsidiaries, and authorized agents. Evolution Bias

™

is a trademark of Krell Industries, Inc. and is a Krell technology

based on U.S. Patent No. 5,331,291. CAST

™, Evolution

CAST

™,

and Krell Current Mode

™

are trademarks of Krell Industries, Inc. All other

trademarks are registered to their respective companies.

P/N 307772