Classe Audio SSP-30 MKII 사용자 설명서

 
These setting are mainly “set and forget”, with the possible exception of OSD output. We have shipped your SSP-30 
MKII with the “TV System” set to the correct format. If you are, however, having trouble with the picture it may be that 
the wrong format is set. It is easy to correct; there are only two formats, NTSC and PAL. Using the display on the front 

panel of the SSP-30 MKII, navigate to the Display setup screen and change the format to PAL or NTSC, whichever is 
correct for your TV and DVD player. All video sources and devices used together should have the same format. 

 

Display setup 
 
 TV system 

    NTSC 

 Superimpose 

        On 

 Temporary disp.         Full 
 Video format 

      Auto 

 OSD output 

      Both 

 Distance unit           Meters 
 OSD style 

           1 

 Exit 

These displays show that you have accessed the Display setup sub-menu and 
highlighted TV System.  You can scan through the available choices by pressing 

repeatedly the \/ and /\ buttons on the remote. When the selection you wish to 
adjust is highlighted press the < or > key to scroll through the choices. To memorize 
and Exit highlight Exit and press the ENTER key. 
 

 

Display setup 
TV system:                           NTSC 

 
 
 

   

 

             Panel display 

 

   TV Display 

 

5.4.1 TV 

System: 

Use 

< or > to switch between NTSC and PAL. 

 

5.4.2 Superimpose: 

Use 

< or > to change. “On” superimposes only words over the TV picture, while “Off” allows 

the OSD to completely replace the TV picture. 

 

5.4.3  Temp. Display controls how long any On Screen Display remains present. Use < or >  to  change.  It  is 

possible to set the parameter to “Full”, (on all the time), “Simple”, (which keeps it on for a few seconds or 

“Off”, which prevents OSD entirely.  

 

5.4.4  Video Format can be set to S-Video output or Composite, or Auto. Auto automatically selects the best source 

present. Use < or > to change. 

 

5.4.5 OSD 

Output 

Use 

< or > to change. OSD can be applied to the Composite, or S-Video Monitor outputs, or 

both, or it may be switched Off. OSD can not be turned on for the “No OSD” outputs. 

 

5.4.6  OSD style changes the screen and text color if Superimpose is switched Off. 

 

5.4.7  Distance unit is setup in feet or meters for use in the Delay Setup menu. 

 

5.4.8  Exit returns to the Main Menu, press ENTER when Exit is highlighted. 

 

 

 

 

 

 

23