Classe Audio CAP-2100 사용자 설명서
42
Care and Maintenance
cleaning the cabinet To remove dust from the cabinet of your integrated amplifi er, use a feather
duster or a soft, lint-free cloth. To remove dirt and fi ngerprints, we recommend
isopropyl alcohol and a soft cloth. Dampen the cloth with alcohol fi rst and
then lightly clean the surface of the integrated amplifi er with the cloth. Do
not use excessive amounts of alcohol that might drip off the cloth and into the
integrated amplifi er.
isopropyl alcohol and a soft cloth. Dampen the cloth with alcohol fi rst and
then lightly clean the surface of the integrated amplifi er with the cloth. Do
not use excessive amounts of alcohol that might drip off the cloth and into the
integrated amplifi er.
Caution!
At no time should liquid cleaners be applied directly
to the surface of the integrated amplifier, as direct
application of liquids may result in damage to electronic
components within the unit.
to the surface of the integrated amplifier, as direct
application of liquids may result in damage to electronic
components within the unit.
cleaning the
LCD touchscreen
To clean the LCD touchscreen, use a microfi ber eyeglass wipe or soft, lint-free
cloth, together with a cleaning solution designed for plastic eyeglasses or LCD
computer monitors/televisions.
cloth, together with a cleaning solution designed for plastic eyeglasses or LCD
computer monitors/televisions.
Important!
Spray the solution onto the cloth or tissue – never directly
onto the touch screen.
onto the touch screen.
installing the
remote control batteries
Th
e battery compartment is situated at the base of the remote control. Remove
the two screws holding the base plate in place, taking care not to lose them.
Insert the two AA batteries (supplied), ensuring that the polarity is the same as
that indicated on the inner surface of the remote control.
Insert the two AA batteries (supplied), ensuring that the polarity is the same as
that indicated on the inner surface of the remote control.