Pelco cm9760-gui 사용자 설명서
Chapter Three: Maps and Administrator Features
12/97
9760-GUI
27
To allocate/restrict operators access to commands:
1. Log on to the system using the Administrator password.
2. Select Menu Access from the Setup menu option. The Menu Access window (illustrated in Figure
3-13) will appear.
3. Click the ON/OFF box next to the option that will be allocated/restricted from operators. If a cross
appears in the box, the command can be executed by operators. If the box is empty, the command
cannot be executed by operators.
cannot be executed by operators.
4. When all options have been set, click OK.
5. When complete save the changes (refer to Saving Files).
3.6.5 Work Station Options
The workstation option window (illustrated in figure 3-14) sets the state of selected commands when opera-
tors log on to the system.
tors log on to the system.
Figure 3-14: Work Stations Options window.
Option
Commands operators can execute if option is ON
Manual Selector
Loads the Manual Selector automatically when operators log on.
Mute Sound
Selects the Mutes Sound option automatically when operators log on.
To allocate/restrict operators access to commands:
1. Log on to the system using the Administrator password.
2. Select Screen Options from the Setup menu option. The Work Station Options window (illus-
trated in Figure 3-14) will appear.
3. Click the ON/OFF box for each option that requires changing. If a cross appears in the box the
command will be ON when operators log on. If the box is empty, the option will be OFF when op-
erators log on.
erators log on.
4. When all changes have been made click OK.
5. When complete save the changes (refer to Saving Files).
Menu Option ON
Menu Option OFF