MRV Communications EM316EDFA-LPR 사용자 설명서

 

 

®

 

 
P/N 1294008-001 Rev D2 

 

30 

 
 

 
5.2.6.3 “show” 
 
The show command displays management and system information related to the 
EM316LNXNM-OT management module, the hosting chassis, other modules in the chassis, 
and ports available within the managed system. The arguments (parameters) following the 
show

 command and the operational context displayed by the system prompt control the 

many functions available through this command. 
 
The box below illustrates the show command. The help “?” is applied first, then the command 
is used with no arguments in the port context of an EDFA module. 
 

 

 
 
The CLI help for the show command is identical in the port-level context and the slot-level 
contexts. Refer to the Slot-Level Commands section for “show?” and “show ?” information. 
 

fiberdriver(port/1.3.1)# show 
Port: 1.3.1 
Name: FO_SC at 1.3.1 
 
Enable: enable 
  Link: no Signal 
 
Connector: fo SC  Medium: single Mode 
TxPower(dBm): -15.26 
      DDiags: Alarm   Temp(C): 23  Supply(V): 3.28 
 
Alarm Cause: TX Loss of Signal Alarm (tx -15.26dBm) 
 
Gain desired(dB): 25 
        Gain(dB): 25.69 
 
fiberdriver(port/1.3.1)#