EAW SW0177 사용자 설명서

Part No. SW0177 Rev. C 05/07

CAZ

1400

STEREO POWER AMPLIFIER

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404

TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 4 of 4

Csi PRoDUCT sPeCiFiCATions FoR DesiGneRs, sPeCiFieRs, AnD ConsUlTAnTs

(Also known as “A&E Specifications”)
The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures”
and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification.

PART 2 PRoDUCTs

2.01

Approved manufacturer/Product

A. EAW Commercial, One Main Street, Whitinsville, MA 01588

B. Model number:

CAZ1400

2.02

Design

A. Configuration:

2-channel power amplifier

1. Inputs:

a. Two balanced mono line inputs (two XLR/1/4" TRS combo line-level input jacks)

b. One screw terminal input strip (Channel A balanced, Channel B balanced)

2. Outputs:

a. One screw terminal output strip (Channel A, Channel B, Bridged Mono)

B. Powering Mode:

a. Internal AC power supply, 120 VAC, 60 Hz or 230 VAC, 50/60 Hz.

2.03

electrical Properties

A. Frequency Response (+0, –1 dB):

25 Hz to 25 kHz

B. Total Harmonic Distortion (20 Hz to 20 kHz @ rated output into 8 ohms):

< 0.03%

C. Signal-to-Noise Ratio:

>100 dB below rated power into 4 ohms

D. Channel Separation (@ 1 kHz):

> 90 dB

E. Input Gain Control Range:

Off to +30 dB

Maximum Input Level:

9.75 V rms (+22 dBu)

G. Rated Output:

1. Continuous sine wave average output power per channel, both channels driven:

a. 310 watts rms into 8 ohms

b. 450 watts rms into 4 ohms

c. 800 watts rms into 2 ohms

2. Continuous sine wave average output power, bridged mono operation:

a. 900 watts rms into 8 ohms

b. 1400 watts rms into 4 ohms

2.04

Physical Properties

A. Dimensions

1. Height:

3.5 in/89 mm

2. Width:

19.0 in/483 mm

3. Depth:

15.7 in/400 mm

B. Weight

1. Net Weight:

48.5 lb/22.0 kg