Yamaha YST-SW800 사용자 설명서

E-

8

1 2

3

4

6

0

7 8

A

9

5

1

Power indicator
Lights up while the subwoofer is turned on.

2

STANDBY/ON button
Press this button to turn on the power.  Press again to
set the subwoofer in the standby mode.
*

This button can be used only when the POWER (

5

)

switch is set in the ON position.

Standby mode
The subwoofer is still using a small amount of power
in this mode.

3

HIGH CUT control
Adjusts the high frequency cut off point.
Frequencies higher than the frequency selected by this
control are all cut off (and no output).
*

One graduation of this control represents 10 Hz.

4

VOLUME control
Adjusts the volume level.  Turn the control clockwise to
increase the volume, and counterclockwise to
decrease the volume.

5

POWER switch
Normally, set this switch to the ON position to use the
subwoofer.  In this state, you can turn on the subwoofer
or turn the subwoofer into the standby mode by
pressing the STANDBY/ON (

2

) button.  Set this

switch to the OFF position to completely cut off the
subwoofer’s power supply from the AC line.

6

BASS switch

By setting this switch to the MOVIE position, the bass
sound in video software is faithfully reproduced. By
setting it to the MUSIC position, the bass sound in
audio software is well reproduced.