Panasonic SC-HTB550 사용자 설명서
Getting started
RQT9660
11
Connect the speaker cables.
≥ Use the “Panasonic” logo to identify the left and right speakers, then connect the cables (as illustrated).
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Drive a screw into the wall.
≥ Use the measurements indicated below to identify the screwing positions on the wall.
≥ Leave at least 20 mm (
≥ Leave at least 20 mm (
25
/
32
q) of space above and on each side of the speaker to allow enough space for fitting the
speaker.
≥ The position on the wall where the screw is to be attached, as well as the screw, should be capable of supporting over
33 kg (72.8 lbs).
≥ Keep the screws out of reach of children to prevent swallowing.
1 Insert the wire
fully.
r: White
s: Blue line
r: White
s: Blue line
2 Press into the
groove.
A RED: Right speaker channel (R)
B WHITE: Left speaker channel (L)
B WHITE: Left speaker channel (L)
C At least 30 mm (1
3
/
16
q)
D
‰4.0 mm (
5
/
32
q)
E
‰7.0 mm to ‰9.4 mm (
9
/
32
q to
3
/
8
q)
F Wall or pillar
G 5.5 mm to 6.5 mm (
G 5.5 mm to 6.5 mm (
7
/
32
q to
1
/
4
q)
H 326 mm (12
27
/
32
q)
I 316 mm (12
7
/
16
q)
J 316 mm (12
7
/
16
q)
K 26 mm (1
1
/
16
q)
L Wall mounting hole
White
Red
Push
Front view (semi-transparent image)
SC-HTB550_RQT9660_mst.book Page 11 Tuesday, December 20, 2011 1:55 PM