Valcom V-1054 전단
Issue 1
1
947674
V-1054
ONE-WAY AMPLIFIED CORNER SPEAKER
INTRODUCTION
The interior corner speaker, the V-1054, is a 8”
Speaker/Amplifier Assembly capable of
reproducing paging as well as back ground
music. The speaker has an externally
accessible volume control that is screwdriver
adjustable. The enclosures are made of steel
with a durable powder coated finish. The color
of the enclosures can easily be changed to
match any decor. A cloth covered detachable
grille is included. The speaker requires
-24VDC, 50mA (1 Valcom power unit).
Speaker/Amplifier Assembly capable of
reproducing paging as well as back ground
music. The speaker has an externally
accessible volume control that is screwdriver
adjustable. The enclosures are made of steel
with a durable powder coated finish. The color
of the enclosures can easily be changed to
match any decor. A cloth covered detachable
grille is included. The speaker requires
-24VDC, 50mA (1 Valcom power unit).
Dimensions/Weight
• 10.00"H x 12.00”W x 4.50”D
(25.4cm H x 30.48cm W x 11.43cm D)
• 3.0 lbs (1.36 kg)
(25.4cm H x 30.48cm W x 11.43cm D)
• 3.0 lbs (1.36 kg)
INSTALLATION
Typical Connections
NOTE: Do not connect this speaker directly to a
25/70/100 Volt amplifier as damage to both the
amplifier and speaker may occur. A V-1095 may
be used to allow the use of Valcom self-amplified
speakers on 70 Volt speaker lines.
25/70/100 Volt amplifier as damage to both the
amplifier and speaker may occur. A V-1095 may
be used to allow the use of Valcom self-amplified
speakers on 70 Volt speaker lines.
Page
Out
Out
Valcom Page
Control
Control
(Tip/A)
(Ring/B)
(-24VDC)
(Gnd)
(Ring/B)
(-24VDC)
(Gnd)
Valcom –24VDC
Power Supply
Power Supply
One-Way
Amplified
Speaker
Amplified
Speaker
Mounting
Remove cloth covered grille from baffle. Place
speaker in the desired mounting location. Mark
“keyhole” slot for mounting (see figure 1). After
making the required connections, secure baffle
to wall with a suitable mounting screw (#10
sheet metal screw or similar). Attach cloth
covered grille to baffle.
speaker in the desired mounting location. Mark
“keyhole” slot for mounting (see figure 1). After
making the required connections, secure baffle
to wall with a suitable mounting screw (#10
sheet metal screw or similar). Attach cloth
covered grille to baffle.
FIGURE 1
COVERAGE
The area covered by a wall speaker is typically
600 square feet.
600 square feet.
Number of Speakers per Audio Run
Wire Run (Feet)
22 AWG
24 AWG
400
800
800
1600
100
50
25
25
60
30
15
30
15
Number of Speakers per Power Run
1 Watt Interior
Speakers
22 AWG
24 AWG
30
15
15
7
200 feet
400 feet
800 feet
400 feet
800 feet
125 feet
250 feet
500 feet
250 feet
500 feet