Snell Acoustics ICS 1070 전단

다운로드
페이지 1
FOR BUILT-IN CABINETS, A UTILITY VERSION 
OF THE ACCLAIMED D7 TOWER
The unique cabinet design, placement switch and wide 
dispersion tweeter of the ICS 1070 bring the performance 
of a freestanding high-end tower to an in-cabinet book-
shelf enclosure. Conventional bookshelf loudspeakers 
sound “chesty” and image poorly when used in in-cabinet 
applications. The ICS 1070 is a 6.5-inch, D’Appolito Array, 
designed by Snell chief engineer, Joe D’Appolito, to fit into 
furniture and millwork, and, is tuned to compensate for 
the sonic problems that these cabinet boundaries cause. 
The twin 6.5-inch long throw woofers provide extended 
bass and plenty of output, while the 1-inch low-resonance, 
silk dome tweeter enables a large sweet spot for better 
stereo imaging. The ICS 1070 uses the same components as 
the Snell D7 Tower and AMC 870 in-wall monitor, mounted 
in a robust, texture-painted enclosure. This high output 
LCR can be used for Left, Center and Right or mixed and 
matched with these two siblings to provide clean, im-
pactful sound with an effortless and “airy” soundstage… 
perfect for music and movies.
ICS Series
 
ICS 1070
  
ICS 1070
Design
Acoustic Suspension D'Appolito Array
Frequency Response
62Hz-22kHz+3dB
Sensitivity
90dB
Nominal Impedance
4 Ohms
Crossover Frequency
2.0kHz
Recommended Amplifier Power
50-300 Watts
Maximum Output (per pair)
110dB
Placement
Wall, or Shelf 
Dispersion Angle (+1dB of on-axis response)
Horizontal: +45 degrees
Vertical:
+12 degrees
Drive Units
Tweeter:      1-inch SEAS Silk Dome
Woofer:       Two 6.5-inch Poly, 5mm Excursion
Video Shielding
Standard
Dimensions
Height:         19.5-inches
Width:           7.75-inches
Depth:          11-inches
Finishes       Cabinet:
Textured Black Paint
Grille:
Black Cloth over MDF Frame
Munufactured by
Snell Acoustics, PO 3717, Peabody MA 01960
www.snellacoustics.com     978-538-6262     978-538-6266fax