Lg Electronics 42WS50MS 사용자 설명서

(Depending on model)

Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustra-
tion and set up the network settings.
This monitor only supports a wired network con-
nection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.

y

y

Do not connect a modular phone cable to the
LAN port.

y

y

Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.

y

y

Network setting menu will not be available
until the display is connected to physical
network.

y

y

Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.

To set up the network seetings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),

1

 Press

MENU to access the main menus.

2

 Press the Navigation buttons to scroll to

and press

.

3

 Press the Navigation buttons to select

and press

.

4

 If you already set Network Setting, select

. The new connection settings resets

the current network settings.

5

 Select

or

.

- If selecting

, press the

Navigation and Number buttons. IP address-
es will need to be input manually.

-

: Select this if there is a

DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.

6

 When you are finished, press

.

LAN

Router

LAN

WAN

Cable modem

ETHERNET

Internet

Internet