Sony STRDH520 사용자 설명서
16
GB
D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB04CON_STR-DH520-
U2.fm
U2.fm
masterpage: Left
STR-DH520
4-263-361-11(1)
Getting started
You can enjoy your audio/video equipment connected to the receiver by following the simple steps
below.
below.
Checking the connection
appropriate for your equipment
appropriate for your equipment
Connecting the TV and video
equipment (page 21, 22)
equipment (page 21, 22)
The image quality depends on the connecting
jack. See the illustration below. Select the
connection according to the jacks on your
equipment.
We recommend that you connect your video
equipment via HDMI connection if they have
HDMI jacks.
jack. See the illustration below. Select the
connection according to the jacks on your
equipment.
We recommend that you connect your video
equipment via HDMI connection if they have
HDMI jacks.
Connecting the audio equipment
(page 28)
(page 28)
HDMI
VIDEO
COMPONENT VIDEO
Y
P
B
/C
B
P
R
/C
R
Analog
High quality image
Digital
Setting the audio output settings on
the connected equipment
the connected equipment
To output multi channel digital audio, check the
digital audio output setting on the connected
equipment.
For a Blu-ray Disc player, check that “Audio
(HDMI)”, “Dolby Digital (Coaxial/Optical)”, and
“DTS (Coaxial/Optical)” are set to “Auto”,
“Dolby Digital” and “DTS” respectively (as of
September 2010).
For a PlayStation 3, check that “BD/DVD Audio
Output Format (HDMI)” is set to “Bitstream”
(with system software version 3.5).
For details, refer to the operating instructions
supplied with the connected equipment.
digital audio output setting on the connected
equipment.
For a Blu-ray Disc player, check that “Audio
(HDMI)”, “Dolby Digital (Coaxial/Optical)”, and
“DTS (Coaxial/Optical)” are set to “Auto”,
“Dolby Digital” and “DTS” respectively (as of
September 2010).
For a PlayStation 3, check that “BD/DVD Audio
Output Format (HDMI)” is set to “Bitstream”
(with system software version 3.5).
For details, refer to the operating instructions
supplied with the connected equipment.
Preparing the receiver
Setting the speakers
(USA and Canada models only)
Select the speaker pattern (page 30), then check
the speaker connection using “T. TONE” in
LEVEL menu (page 35). If the sound is not output
correctly, check the speaker connection and make
the settings explained above again.
Select the speaker pattern (page 30), then check
the speaker connection using “T. TONE” in
LEVEL menu (page 35). If the sound is not output
correctly, check the speaker connection and make
the settings explained above again.
(Other models)
Select the speaker pattern (page 30), then perform
Auto Calibration (page 31).
You can check the speaker connection using
Select the speaker pattern (page 30), then perform
Auto Calibration (page 31).
You can check the speaker connection using
“T. TONE” in LEVEL menu (page 35). If the
sound is not output correctly, check the speaker
connection and make the settings explained
above again.
sound is not output correctly, check the speaker
connection and make the settings explained
above again.