Sony STRDH520 사용자 설명서

D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB03DES_STR-DH520-
U2.fm

STR-DH520

4-263-361-11(1)

qs

qd

qa

1

3

2

4

5

6

8

9

7

q;

A Playback channel indicators

The letters (L, C, R, etc.) indicate the channels 
being played back. Based on the speaker 
settings, the box around the letter(s) vary to 
show how the receiver downmixes the source 
sound.

 

 

 

 

 

 
SBL

 

 

 

 

 

 

Front Left High
Front Right High

 

Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the 
surround equipment 
obtained by Pro Logic 
processing)
Surround Back Left
Surround Back Right
Surround Back (the 
surround back equipment 
obtained by 6.1 channel 
decoding)
Example:
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO

B SW

Lights up when the audio signal is output from 
the SUBWOOFER jack.

C

Lights up when the disc being played back 
contains an LFE (Low Frequency Effect) 
channel and the LFE channel signal is actually 
being reproduced.

D Input indicator

Lights up to indicate the current input.

HDMI
– The INPUT MODE is set to “AUTO”, and 

when the receiver recognizes the equipment 
connected via an HDMI IN jack (page 51).

– The TV input detected Audio Return Channel 

(ARC) signals.

COAX
The INPUT MODE is set to “AUTO” or  
“COAX”, and when the source signal is a digital 
signal through the COAXIAL jack (page 51).
OPT
The INPUT MODE is set to “AUTO” or  
“OPT”, and when the source signal is a digital 
signal through the OPTICAL jack (page 51).

E DTS(-ES) indicator

Lights up the respective indicator when the 
receiver is decoding the corresponding DTS 
format signals.

 

 

DTS 96/24   

DTS 
DTS-ES
DTS 96 kHz/24 bit

Note
When playing a DTS format disc, make sure that 
you have completed the digital connections and 
that INPUT MODE is not set to “ANALOG” 

 

F NEO:6

Lights up when DTS Neo:6 Cinema/Music 
decoder is activated (page 44).