Sony STR-DA1500ES 사용자 설명서

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U 
VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm

STR-DA1500ES
4-129-743-11(1)

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure. This procedure can also 
be used to return settings you have made to 
their factory defaults. 
Be sure to use the buttons on the receiver for 
this operation.

Press ?/1 to turn off the 
receiver.

Hold down ?/1 for 5 seconds.

“CLR ALL” and “PUSH ENT” appears 
on the display alternately.

After “CLEARING” appears on the 
display for a while, “CLEARED” 
appears.
All the settings you have changed or 
adjusted are reset to the initial settings.

Insert two R6 (size-AA) batteries in the 

 

RM-AAU056 Remote Commander.
Observe the correct polarity when installing 
batteries.

• Do not leave the remote in an extremely hot or 

humid place.

• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of 

batteries.

• Do not expose the remote sensor to direct sunlight 

or lighting apparatuses. Doing so may cause a 
malfunction.

• If you do not intend to use the remote for an 

extended period of time, remove the batteries to 
avoid possible damage from battery leakage and 
corrosion.

• When you replace the batteries, the remote buttons 

may be reset to their factory settings. If this 
happens, reassign the buttons again (page 51).

• When the remote no longer operates the receiver, 

replace all the batteries with new ones.

MEMORY/ENTER

?/1