Sony XL-HF200P(BK) 사용자 설명서

When the preset time is reached, playback will start. The 
volume will increase gradually until it reaches the preset 
volume. The timer indicator will blink during timer playback.

When the timer end time is reached, the system will enter the 
power stand-by mode automatically.

Once timer:
The timer will be canceled.

Daily timer:
The timer operates at the same time every day. It will continue 
until the daily timer setting is canceled. Cancel the daily timer 
when it is not in use.

To adjust the day, press the 

 or 

 button and then press 

the ENTER button.

Press the ENTER button to adjust the hour. Press the 

 or 

 button and then press the ENTER button.

To adjust the minutes, press the 

 or 

 button and then 

press the ENTER button.

Set the time to fi nish as in steps 7 and 8 above.

Adjust the volume using the VOLUME control, and then press 
the ENTER button. Do not turn the volume up too high.

Press the ON/STAND-BY button to enter the power stand-by 
mode. The “TIMER” indicator lights up and the unit is ready 
for timer playback.

When performing timer playback using another unit 
connected to the USB terminal or AUDIO IN jack, select 
“USB” or “AUDIO IN” or “LINE IN” in step 5.
This unit will turn on or enter the power stand-by mode 
automatically. However, the connected unit will not turn on 
or off. To stop the timer playback, follow step “Canceling the 
timer setting” of this page.

Turn the power on and press and hold down the CLOCK/
TIMER button.

Within 10 seconds, press the 

 or 

 button to select 

“Once” or “Daily”, and press the ENTER button.

Within 10 seconds, press the 

 or 

 button to select 

“Timer Call”, and press the ENTER button.

Turn the power on and press and hold down the CLOCK/
TIMER button.

Within 10 seconds, press the 

 or 

 button to select 

“Once” or “Daily”, and press the ENTER button.

Within 10 seconds, press the 

 or 

 button to select 

“Timer Off”, and press the ENTER button. Timer will be 
canceled (the setting will not be canceled).

Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse 
the same setting, perform the following operations.

Turn the power on and press and hold down the CLOCK/
TIMER button.

Within 10 seconds, press the 

 or 

 button to select 

“Once” or “Daily”, and press the ENTER button.

Within 10 seconds, press the 

 or 

 button to select 

“Timer On” , and press the ENTER button.

Press the ON/STAND-BY button to enter the power stand-
by mode.

●

●

■

Check that the clock is set to the correct time (refer to 
page 11-12). If it is not set, you cannot use the timer 
function.

For timer playback: Plug in USB or load discs or dock iPod 
to be played.

●

●

Press the ON/STAND-BY button to turn the power on.

Press and hold the CLOCK/TIMER button.

Within 10 seconds, press the 

 or 

 button to select 

“Once” or “Daily”, and press the ENTER button.

Within 10 seconds, press the 

 or 

 button to select 

“Timer Set”, and press the ENTER button.

To select the timer playback source (CD, TUNER, USB, iPod, 
AUDIO IN, LINE IN), press the 

 or 

 button. Press the 

ENTER button. 

When you select the tuner, select a station by pressing the 

 

or 

 button, and then press the ENTER button. If a station 

has not been programed, “No Preset” will be displayed and 
timer setting will be canceled.

To adjust the hour, press the 

 or 

 button and then press the 

ENTER button. Press the 

 or 

 button once to advance the time by 

1 hour. Hold it down to advance continuously.

To adjust the minutes, press the 

 or 

 button and then press the 

ENTER button. Press the 

 or 

 button once to advance the time 

by 1 minute.

To confi rm the time display:
Press the CLOCK/TIMER button. The time display will appear for about 5 
seconds.

Note:
When power supply is restored after unit is plugged in again or after a power 
failure, reset the clock (pages 11).

To readjust the clock:
Perform “Setting the clock” from step 1. If the “Clock” does not appear in step 
2, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.

Clear all the programed contents. [Refer to “Factory reset, clearing all 
memory” on page 14 for details.]

Perform “Setting the clock” from step 1 onwards.

Once timer:
Once timer play works for one time only at a preset time.
(“ ” indicator).

Daily timer:
Daily timer play works at the same preset time every day that we 
set. For example, set the timer as a wake-up call every morning.
(“DAILY” indicator).

Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio program, and 
use the daily timer to wake up.

1 minute or more

Daily timer

Once timer

Start

Stop

Start

Stop

XL-HF200P_USA_EN.indd   12

XL-HF200P_USA_EN.indd   12

7/16/2010   9:11:05 AM

7/16/2010   9:11:05 AM