Sony STR-LV700R 사용자 설명서
masterpage:Left
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB09_STR-LV700-CEL.fm]
\01GB09_STR-LV700-CEL.fm]
74
GB
model name1[STR-LV700R]
[4-249-847-12(1)]
When the Select a Server screen
appears
appears
If no VAIO computer normally connected is set,
the Select a Server screen appears. Use
the Select a Server screen appears. Use
/
to select the VAIO computer to be connected,
press the SELECT button, and then select
Connect.
To set the VAIO computer normally connected,
see page 49.
press the SELECT button, and then select
Connect.
To set the VAIO computer normally connected,
see page 49.
To record a broadcast received
by a different VAIO computer
by a different VAIO computer
When there is more than one VAIO computer
connected to the receiver, you can select the
VAIO computer to which you want to connect.
To do so, press the OPTIONS button. On the
OPTIONS menu, select Select a Server, and
then press the SELECT button. In the Select a
Server screen, select the VAIO computer to be
connected, select Connect, and then press the
SELECT button. Recording is performed on the
VAIO computer selected in the Select a Server
screen.
connected to the receiver, you can select the
VAIO computer to which you want to connect.
To do so, press the OPTIONS button. On the
OPTIONS menu, select Select a Server, and
then press the SELECT button. In the Select a
Server screen, select the VAIO computer to be
connected, select Connect, and then press the
SELECT button. Recording is performed on the
VAIO computer selected in the Select a Server
screen.
3
Select the channel with the
CH +/-
buttons.
You can also press the ALT button so that it
lights, and then change the channel with the
number buttons.
lights, and then change the channel with the
number buttons.
For example, to change to channel 12, press
number buttons 1 and 2 successively, and
then press the orange ENTER button.
number buttons 1 and 2 successively, and
then press the orange ENTER button.
Note
The channels changes three to five seconds after
you press the orange ENTER button.
you press the orange ENTER button.
4
Press the
REC
button.
The screen pauses, and after a short delay
recording starts. Recording stops
automatically 30 minutes later.
recording starts. Recording stops
automatically 30 minutes later.
To extend the recording time
Press the REC button. Each press increases
the recording time by 30 minutes up to a
maximum of 6 hours.
the recording time by 30 minutes up to a
maximum of 6 hours.
For example, to record for 2 hours, press the
REC button four times.
REC button four times.
To change the recording quality
5
Press the
REC STOP
button.
Recording stops soon after. The display
then freezes temporarily, but resumes
normal display momentarily.
then freezes temporarily, but resumes
normal display momentarily.
Notes
• When recording, it is not possible to change the
recording mode (High Quality, Standard, Long
Play). To change the recording mode, stop
recording. For details see page 76.
Play). To change the recording mode, stop
recording. For details see page 76.
• When recording, it is not possible to select a different
function.
• When recording a programme on the VAIO
computer, it is not possible to start playing the same
programme from the beginning with Network Media.
programme from the beginning with Network Media.
• It takes approximately 20 seconds before pressing
the REC or REC STOP button takes effect. Allow
sufficient time to take this into account before you
start recording.
sufficient time to take this into account before you
start recording.
• When recording stops, the display freezes for
approximately 20 seconds.
To display and exit the screen
display
display
Press the blue DISPLAY button. Each time you
press the blue DISPLAY button, the screen
display appears or disappears.
press the blue DISPLAY button, the screen
display appears or disappears.