Sony S605 사용자 설명서

 

 

NW-S603/S605/S703F/S705F/S706F.GB 2-887-743-13(1)



  Press the  button of the player, and then start playing the 

audio device.
When the synchronized recording is set, recording starts automatically 

when the player detects sound from the audio device.

If no sound is detected, the player pauses recording, and when the player 

detects sound again, it starts recording sound as the next song.

If no sound is detected more than 5 minutes, the player enters the 

recording standby mode.

The recorded song names are labeled as “NNN_hhmm” (serial number_

hour/minute), and folder names are labeled as “NN_mmdd” (serial 

number_month/day). When the current time is not set on the player, 

“NNN_0000” (serial number_0000) appears. Setting the current time is 

recommended ( page 50).

Press the  button.

Press the  button to start recording in step 



. The player does not detect 

sound from the audio device.

Press the  button to stop recording.



 To enable/disable the synchronized recording setting, see “Changing the Synchronized 

Recording Settings” ( page 71).

 To switch to the recording remaining time screen, press the DISPLAY/HOME button.

 2 GB is the maximum recording capacity for a song. If a song is more than 2 GB, the part 

after 2 GB will be recorded as the next song.

 You may not be able to record with the proper sound quality, depending on the audio 

output level from the audio device. In case of an accessory with a record level shift 

switch, you may be able to achieve the proper recording level by adjusting the record 

level shift switch.  

For details, see the operation guide supplied with the optional accessories for recording 

with the player.