Sony MHC-GNZ888D 사용자 설명서

• A TV or VCR is placed too close to the 

unit. Move the unit away from the TV or 
VCR.

• Move the unit away from the source of 

noise.

• Connect the unit to a different wall 

outlet.

• Install a noise filter (commercially 

available) to the power cord.

• Check the timer setting and set the 

correct time (page 65).

• Cancel the Sleep Timer function 

(page 65).

• You cannot select the Play Timer and 

the Timer Recording at the same time.

• Remove the obstacles between the 

remote and the unit.

• Move the remote closer to the unit.
• Point the remote at the unit’s sensor.
• Replace the batteries (R6/size AA).
• Move the unit away from the 

fluorescent light.

• Reduce the volume.
• Move the microphone away from the 

speakers or change the direction of the 
microphone.

• Turn off the TV at once, then turn it on 

after 15 to 30 minutes. If the color 
irregularity still persists, place the 
speakers farther away from the TV.

• If “TV” appears in the display when you 

press TV/SAT on the unit, switch to 
“SAT” function (see “To switch 
between the “TV” and “SAT” function” 
on page 73).

• If the distance between the TV and this 

unit is too far, this function may not 
work. Install the unit near the TV.

• Place the speakers as symmetrically as 

possible.

• Check that the speaker are connected 

securely and correctly.

• The source being played back is 

monaural.

• Adjust the level of each speaker 

(page 51).

• Depending on the disc, the sound may 

come from the center speaker only.

• Set the subwoofer level to the 

appropriate level.

• No sound is produced from the 

subwoofer when you play back a DVD 
VIDEO that does not have subwoofer 
output recorded.

• The software being played back has 

limited sound effects.

• Check that the subwoofer is connected 

securely and correctly.

• Make sure that “SUBWOOFER” is set 

to “YES” (page 51).

l