Sony RDHGTK1I 매뉴얼

model name [FST-GTK2i]

[4-186-872-11(2)] GB

filename[D:\NORM'S JOB\SONY HA\SO0098\G-
Tank_PMRF\4186872112_GB\GB05CON.fm]

masterpage:Left

B AUDIO IN L/R jacks

Use an audio cord (not supplied) to 
connect the audio output of the optional 
audio component to these jacks. You can 
then output audio through this unit.

C SUBWOOFER OUT jack 
(FST-GTK2i only)

Use a supplied subwoofer cable to 
connect the SUBWOOFER OUT jack on 
the unit and INPUT jack on the 
subwoofer.

• Be sure to use only the supplied subwoofer 

and subwoofer cable.

• Be sure to connect the subwoofer cable 

securely and correctly to the unit and the 
subwoofer.

• Do not connect other component to this jack.

D VOLTAGE SELECTOR

For models equipped with a voltage 
selector, set VOLTAGE SELECTOR to 
the local power line voltage.
Depending on the model, the VOLTAGE 
SELECTOR may differ.

E Power

Connect the power cord to a wall outlet. 
Press the POWER on the back panel to 
turn on the AC power.
If the supplied adaptor on the plug does 
not fit your wall outlet, detach it from the 
plug (only for models equipped with an 
adaptor).

(Except North American model)

The demonstration appears in the display.
When you press "/1, the unit turns on 
and the demonstration automatically 
ends.

You can use the subwoofer to enhance the 
bass.
Make sure the subwoofer cable is 
connected before using the subwoofer.

The subwoofer turns on and the power 
indicator lights up.

• Place the subwoofer vertically to obtain a 

better bass reproduction.

• Position the subwoofer

– on a solid floor where resonance is unlikely 

to occur.

– at least a few centimeters away from the 

wall.

– away from the center of the room or place a 

bookshelf against a wall, to avoid 
generating a standing wave.

SUBWOOFER

ON/OFF

Power indicator

SUBWOOFER

LEVEL