Sony RDHGTK1I 매뉴얼
model name [FST-GTK2i]
[4-186-872-11(2)] GB
20
GB
filename[D:\NORM'S JOB\SONY HA\SO0098\G-
Tank_PMRF\4186872112_GB\GB07ADD.fm]
Tank_PMRF\4186872112_GB\GB07ADD.fm]
masterpage:Left
The USB device cannot be
connected into the
connected into the
(USB) port.
• The USB device is being connected
backwards. Connect the USB device in
the correct orientation.
the correct orientation.
“READING” is displayed for an
extended time, or it takes a long time
before playback starts.
extended time, or it takes a long time
before playback starts.
• The reading process can take a long time
in the following cases.
– There are many folders or files on the
– There are many folders or files on the
USB device.
– The file structure is extremely
complex.
– The memory capacity is excessive.
– The internal memory is fragmented.
Thus, we recommend following these
guidelines.
– Total folders on USB device: 100 or
– The internal memory is fragmented.
Thus, we recommend following these
guidelines.
– Total folders on USB device: 100 or
less (including “ROOT” folder)
– Total files per folder: 100 or less
Erroneous display.
• The data stored in the USB device may
have been corrupted.
• The character codes that can be
displayed by this unit are as follows:
– Upper cases (A to Z)
– Numbers (0 to 9)
– Symbols (’ < > * + , – . / @ [ \ ] _ `)
Other characters may not be displayed
correctly.
– Upper cases (A to Z)
– Numbers (0 to 9)
– Symbols (’ < > * + , – . / @ [ \ ] _ `)
Other characters may not be displayed
correctly.
The USB device is not recognized.
• Press POWER on the back panel to turn
off the unit and reconnect the USB
device, then turn on the unit.
device, then turn on the unit.
• Connect the supported USB device
• The USB device does not work
properly. Refer to the USB device
operating instruction on how to deal
with this problem.
operating instruction on how to deal
with this problem.
Playback does not start.
• Press POWER on the back panel to turn
off the unit and reconnect the USB
device, then turn on the unit.
device, then turn on the unit.
• Connect the supported USB device
(page 26).
• Press NX to start playback.
Audio file cannot be played back.
• MP3 files in MP3 PRO format cannot be
played back.
• The audio file is a multiple track audio
file.
• Some AAC files may not be played back
correctly.
• WMA files in Windows Media Audio
Lossless and Professional format cannot
be played back.
be played back.
• USB device formatted with file systems
other than FAT16 or FAT32 are
unsupported.*
unsupported.*
• If you use partitioned USB device, only
audio files on the first partition can be
played back.
played back.
• Playback is possible up to 8 levels
(including “ROOT” folder).
• The number of folders has exceeded 100
(including “ROOT” folder).
• The number of files in a folder has
exceeded 100.
• Files that are encrypted or protected by
passwords, etc. cannot be played back.
* This unit supports FAT16 and FAT32, but
some USB device may not support all of these
FAT. For details, refer to the operating
instruction of each USB device or contact the
manufacturer.
FAT. For details, refer to the operating
instruction of each USB device or contact the
manufacturer.