Sony CMT-VP100 사용자 설명서

Precautions

Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.

• The unit is not disconnected from the AC power

source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.

• Unplug the system from the wall outlet (mains) if it

will not be used for an extended period of time.  To
disconnect the power cord (mains lead), pull it out
by the plug.  Never pull the cord itself.

• Should any solid object or liquid fall into the

system, unplug the system and have it checked by
qualified personnel before operating it any further.

• AC power cord must be changed only at the

qualified service shop.

• Do not place the system in an inclined position.
• Do not place the system in locations where it is:

— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibrations
— Subject to direct sunlight

• Although the unit heats up during operation, this is

not a malfunction.

• Place the system in a location with adequate

ventilation to prevent heat build-up in the system.

If you continuously use this system at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably.  To avoid burning yourself, do not
touch the cabinet.
To prevent a malfunction, do not cover the ventilation
hole for the cooling fan.

• If the system is brought directly from a cold place

to a warm place, or is placed in a very damp room,
moisture may condense on the lens inside the
VIDEO CD/CD player.  Should this occur, the
system will not operate properly.  Remove the disc
and leave the system turned on for about an hour
until the moisture evaporates.

• When moving the unit, remove any disc that may be

on the disc tray.

If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.

• Before playing a disc, clean the disc surface with a

cleaning cloth.  Wipe the disc from the center out.

• Do not play a disc with tape, stickers, or adhesives

on any of its surfaces as this may damage the
system.

• Do not use solvents.
• Do not expose the discs to direct sunlight or heat

sources.

• Discs with non-standard shapes (e.g., heart, square,

star) cannot be played on this system.  Attempting
to do so may damage the system.  Do not use such
discs.

Clean the cabinet, panel and controls with a soft cloth
slightly moistened with mild detergent solution.  Do
not use any type of abrasive pad, scouring powder or
solvent such as thinner, benzene or alcohol.

To prevent a tape from being accidentally recorded
over, break off the cassette tabs from side A or side B
as illustrated.

If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.

Take up any slack in the tape.  Otherwise the tape
may get entangled in the tape deck’s playing
mechanism and become damaged.

The tape is very elastic.  Do not change the tape
operations such as play, stop, and fast-winding etc.
too frequently.  The tape may get entangled in the
tape deck’s playing mechanism.

Break off the
cassette tab