Sony MHC-RG550 사용자 설명서
18
GB
Searching for the beginning of
the current or the next track
(AMS)*
the current or the next track
(AMS)*
To go forward
Press > during playback when H lights.
“TAPE A (or TAPE B) >>> +1” appears.
Press . during playback when h lights.
“TAPE A (or TAPE B) <<< +1” appears.
“TAPE A (or TAPE B) >>> +1” appears.
Press . during playback when h lights.
“TAPE A (or TAPE B) <<< +1” appears.
To go back
Press . during playback when H lights.
“TAPE A (or TAPE B) <<< –1” appears.
Press > during playback when h lights.
“TAPE A (or TAPE B) >>> –1” appears.
“TAPE A (or TAPE B) <<< –1” appears.
Press > during playback when h lights.
“TAPE A (or TAPE B) >>> –1” appears.
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under the
following circumstances:
following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Tip
When a tape is inserted, corresponding forward/
reverse indicators light.
reverse indicators light.
You can record a whole CD on a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
1
Load a recordable tape into deck B,
then press TAPE A/B to select deck B.
then press TAPE A/B to select deck B.
2
Press DIRECTION on the unit
repeatedly to select
repeatedly to select
g
to record on
one side. Select
j
(or RELAY) to
record on both sides.
When you want to record from the reverse
side, press nN, then press x. The TAPE
B reverse side indicator lights up.
side, press nN, then press x. The TAPE
B reverse side indicator lights up.
3
Press CD and load a disc you want to
record.
record.
4
Press CD SYNC on the unit.
Deck B stands by for recording.
“REC” flashes.
5
Press REC PAUSE/START on the unit.
Recording starts.
To stop recording
Press x.
To record a disc by specifying
track order
track order
You can record only your favorite CD tracks
using Program Play. Between steps 3 and 4,
perform steps 2 to 5 of “Creating your own
program” (page 12).
using Program Play. Between steps 3 and 4,
perform steps 2 to 5 of “Creating your own
program” (page 12).
Tips
• To check the required tape length for recording a
disc, press EDIT on the unit until “EDIT” flashes
after you have loaded disc and pressed CD. The
required tape length for the currently selected disc
appears, followed by the total playing time for side A
and side B respectively (Tape Select Edit).
after you have loaded disc and pressed CD. The
required tape length for the currently selected disc
appears, followed by the total playing time for side A
and side B respectively (Tape Select Edit).
• You cannot use Tape Select Edit for discs containing
over 20 tracks or MP3 audio tracks.
Tape – Recording
Recording your favorite
CD tracks on a tape
CD tracks on a tape
— CD-TAPE Synchro Recording