Sony DHC-MD515 매뉴얼
67
Messages
One of the following messages may appear or
flash in the display during MD operation.
flash in the display during MD operation.
MD
Auto Cut
The MD deck is pausing the recording
because silence continued for 30 seconds or
more during digital recording.
because silence continued for 30 seconds or
more during digital recording.
Blank Disc
The inserted recordable MD is brand-new
or all tracks on the MD have been erased.
or all tracks on the MD have been erased.
Cannot Copy
You cannot make a digital recording (see
“Guide to the Serial Copy Management
System” on page 64).
“Guide to the Serial Copy Management
System” on page 64).
Can't EDIT
A pre-recorded MD is in the deck.
You tried to edit in Program or Shuffle Play
mode.
You tried to edit in Program or Shuffle Play
mode.
Cannot REC
A pre-recorded MD is in the deck.
Complete
The editing operation of MDs is completed.
Disc Full
There is no time remaining on the disc (see
“System limitations of MDs on page 64).
“System limitations of MDs on page 64).
Impossible
You tried to make an impossible editing
operation (see page 51).
You tried to combine a track, which is not
possible due to a technical limitation of MD
system (see page 52).
operation (see page 51).
You tried to combine a track, which is not
possible due to a technical limitation of MD
system (see page 52).
MECHA ERROR
The transport MD cartridge is inserted.
Name Full
There is no more space to store track or
disc titles.
disc titles.
NEW
The deck stands by for recording on a
brand-new MD or from the end of the
recorded portion.
brand-new MD or from the end of the
recorded portion.
NO DISC
There is no MD in the deck.
Tuner
Severe hum or noise (“TUNED” or
“STEREO” flashes in the display).
“STEREO” flashes in the display).
• Adjust the antenna.
• The signal strength is too weak. Connect
• The signal strength is too weak. Connect
an external antenna.
A stereo FM program is not received in
stereo.
stereo.
• Press STEREO/MONO so “STEREO”
appears.
continued