Sony MEX-1GP 사용자 설명서

다운로드
페이지 116
14
• PRESET/DISC control
The same as (GP/ALBM) +/– on the unit (push 
in and rotate).
• VOL (volume) control
The same as the volume control dial on the unit 
(rotate).
• SEEK/AMS control
The same as (SEEK) –/+ on the unit (rotate, or 
rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on 
the right hand side of the steering column, you 
can reverse the operative direction.
While pushing the VOL control, press and 
hold (SEL).
Auxiliary audio equipment
You can connect optional Sony portable devices 
to the BUS AUDIO IN/AUX IN terminal on the 
unit. If the changer or other device is not 
connected to the terminal, the unit allows you to 
listen to the portable device on your car speakers.
Note
When connecting a portable device, be sure BUS 
CONTROL IN is not connected. If a device is 
connected to BUS CONTROL IN, “AUX” cannot be 
selected as source.
Tip
When connecting both a portable device and a 
changer, use the optional AUX-IN selector.
Selecting auxiliary equipment
Press (SOURCE) repeatedly until “AUX 
AUDIO” appears.
Operate by the portable device itself.
Adjust the volume level
Be sure to adjust the volume for each connected 
audio device before playback.
Turn down the volume on the unit.
Press (SOURCE) repeatedly until “AUX 
AUDIO” appears.
Start playback of the portable audio device at a 
moderate volume.
Set your usual listening volume on the unit.
Press the select button repeatedly until “AUX” 
appears, and rotate the volume control dial to 
adjust the input level (±6 dB).
To increase
To decrease