Sony MDS-JE530 사용자 설명서
MICROFILM
SERVICE MANUAL
MINI DISC DECK
US Model
Canadian Model
AEP Model
UK Model
E Model
SPECIFICATIONS
MDS-JE530
Model Name Using Similar Mechanism
MDS-JE520
MD Mechanism Type
MDM-5D
Optical Pick-up Type
KMS-260B/J1N
U.S. and foreign patents licensed form Dolby Laboratories
Licensing Corporation.
Licensing Corporation.
Photo: Black model
System
MiniDisc digital audio system
Disc
MiniDisc
Laser
Semiconductor laser (
λ
= 780 nm)
Emission duration: continuous
Laser output
Less than 44.6 µW*
* This output is the value measured
* This output is the value measured
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Laser diode
Material: GaAlAs
Revolutions (CLV)
400 rpm to 900 rpm
Error correction
Advanced Cross Interleave Reed
Solomon Code (ACIRC)
Solomon Code (ACIRC)
Sampling frequency
44.1 kHz
Coding
Adaptive Transform Acoustic Coding
(ATRAC)
(ATRAC)
Modulation system
EFM (Eight-to-Fourteen Modulation)
Number of channels
2 stereo channels
Frequency response
5 to 20,000 Hz ±0.3 dB
Signal-to-noise ratio
Over 98 dB during playback
Wow and flutter
Below measurable limit
Input
LINE (ANALOG) IN
Jack type: phono
Impedance: 47 kilohms
Rated input: 500 mVrms
Minimum input: 125 mVrms
Impedance: 47 kilohms
Rated input: 500 mVrms
Minimum input: 125 mVrms
DIGITAL OPTICAL IN
Connector type: square optical
Impedance: 600 nm (optical wave length)
Impedance: 600 nm (optical wave length)
DIGITAL COAXIAL IN
Jack type: phono
Impedance: 75 ohms
Rated input: 0.5 Vp-p, ±20%
Impedance: 75 ohms
Rated input: 0.5 Vp-p, ±20%
Outputs
PHONES
Jack type: stereo phone
Rated output: 28 mW
Load impedance: 32 ohms
Rated output: 28 mW
Load impedance: 32 ohms
LINE (ANALOG) OUT
Jack type: phono
Rated output: 2 Vrms (at 50 kilohms)
Load impedance: Over 10 kilohms
Rated output: 2 Vrms (at 50 kilohms)
Load impedance: Over 10 kilohms
DIGITAL OPTICAL OUT Connector type: square optical
Rated output: –18 dBm
Load impedance: 660 nm (optical
wave length)
Load impedance: 660 nm (optical
wave length)
General
Power requirements
North American model:
North American model:
120 V AC, 60 Hz
European model:
230 V AC, 50/60 Hz
Other models:
110 – 120 V or 220 – 240 V AC, 50/60 Hz
Adjustable with voltage selector
Adjustable with voltage selector
Power consumption
16 W
Dimension (approx.)
430
×
95
×
280 mm (w/h/d) incl.
projecting parts and controls
Mass (approx.)
3.4 kg
Supplied accessories
• Audio connecting cords (2)
• Optical cable (1)
• Remote commander (remote) RM-D29M (1)
• R6 (size-AA) batteries (2)
• Optical cable (1)
• Remote commander (remote) RM-D29M (1)
• R6 (size-AA) batteries (2)