Sony CMT-EX200 매뉴얼
22
Specifications (continued)
Sub woofer (SA-WEX200)
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohms loads, from 50 – 150 Hz; rated 30 watts
per channel minimum RMS power, with no more than
10% total harmonic distortion from 250 milli watts to
rated output.
DISTORTION:
With 4 ohms loads, from 50 – 150 Hz; rated 30 watts
per channel minimum RMS power, with no more than
10% total harmonic distortion from 250 milli watts to
rated output.
Canadian model:
Continuous RMS power output (reference):
30 watts
(4 ohms at 55 Hz, 10%
THD)
(4 ohms at 55 Hz, 10%
THD)
Speaker system
Active sub woofer
(magnetically shielded
design)
(magnetically shielded
design)
Speaker unit
10 cm dia, cone type
woofer (
woofer (
×
2)
Practical maximum output 30 watts
Reproduction frequency range
Reproduction frequency range
45 – 150 Hz
High frequency cut-off range
70 – 150 Hz
Phase selector
Normal, reverse
Input
SPEAKER INPUT:
Input terminal
Input terminal
Output
SPEAKER OUTPUT:
Output terminal
Output terminal
Power requirements
120 V AC, 60 Hz
Power consumption
40 watts
Dimensions
Approx. 150
×
220
×
345 mm (w/h/d, incl.
projecting parts and
controls)
projecting parts and
controls)
Mass
Approx. 6.2 kg
Design and specifications are subject to change
without notice.
without notice.
AM tuner section
Tuning range
530 – 1,710 kHz
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
Antenna
AM loop antenna
External antenna terminals
External antenna terminals
Intermediate frequency
450 kHz
Satellite speaker (SS-CEX200)
Speaker system
2-way, bass-reflex type
Speaker units
Woofer:
Woofer:
9 cm dia., cone type
Tweeter:
5 cm dia., cone type
Impedance
4 ohms
Dimensions
130
×
220
×
183 mm
(w/h/d, incl. projecting
parts and controls)
parts and controls)
Mass
Approx 2.0 kg net per
speaker
speaker
General
Power requirements
120 V AC, 60 Hz
Power consumption
40 watts
1.8 watts (in standby
mode)
1.8 watts (in standby
mode)
Dimensions
175
×
222
×
201 mm
(w/h/d, incl. projecting
parts and controls)
parts and controls)
Mass
Approx. 3.2 kg
Supplied accessories
Remote commander with
battery (1)
AM loop antenna (1)
FM wire antenna (1)
Speaker cords (4)
battery (1)
AM loop antenna (1)
FM wire antenna (1)
Speaker cords (4)