Sony LBT-G1300 사용자 설명서
LBT-G1/LBT-G1300. 3-859-546-53. EN
5
Step 2: Setting the
time
time
You must set the time beforehand to use the
timer function.
timer function.
1
Press CLOCK SET for a few
seconds, when the power is off.
“– – : – –” appears.
seconds, when the power is off.
“– – : – –” appears.
2
Press )± or ≠0 and set
the hour. “A” indicates AM and “P”
indicates PM.
the hour. “A” indicates AM and “P”
indicates PM.
3
Press CLOCK SET.
The minute indication flashes.
The minute indication flashes.
4
Press )± or ≠0 and set
the minute.
the minute.
2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
connect it.
Set VOLTAGE SELECTOR to the
position of your local power line
voltage (For LBT-G1 only).
position of your local power line
voltage (For LBT-G1 only).
Connect the AC power cord to a
wall outlet.
wall outlet.
If the plug of this unit does not fit your
wall outlet, detach the supplied adapter
from the plug (Except for North
American models).
wall outlet, detach the supplied adapter
from the plug (Except for North
American models).
Inserting two R03 (size AAA)
batteries into the remote
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
time, remove the batteries to avoid possible damage
from battery leakage.
3
continued
1,3,5
2,4
ANTENNA
AM
FM
750HM
4
110V-120V
220V-240V
VOLTAGE SELECTOR
AM loop antenna
Extend the FM wire
antenna horizontally.
antenna horizontally.