Sony HT-CT100 매뉴얼
8
US
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a wall beam. Install the
satellite speaker on a vertical and flat reinforced area
of the wall.
attach the screws securely to a wall beam. Install the
satellite speaker on a vertical and flat reinforced area
of the wall.
• Be sure to subcontract the installation to Sony dealers
or licensed contractors and pay special attention to
safety during the installation.
safety during the installation.
• Sony is not responsible for accidents or damage
caused by improper installation, insufficient wall
strength, improper screw installation or natural
calamity, etc.
strength, improper screw installation or natural
calamity, etc.
Connecting the system
Connect the active subwoofer and the satellite
speaker as shown in the illustration below.
speaker as shown in the illustration below.
Connect the speaker cord to the active
subwoofer.
subwoofer.
Secure the jack by tightening the two screws.
Notes
HDMI
SPEAKER
ONLY FOR
SS-MCT100
Rear of the satellite speaker
Speaker cord
(approx. 3 m (10 feet))
(approx. 3 m (10 feet))
Rear of the active subwoofer
IN
IN
HD
MI
DV
D
DV
D IN
SA
T IN
TV O
UT
SPE
AKE
R
ON
LY FO
R
SS
-M
CT10
0