Sony BDV-IT1000 사용자 설명서
72
GB
Gettin
g
Star
ted
19
Press
X/x to select [OK].
To cancel, select [Cancel].
Note
• Make sure that the headphones are not
connected to the surround amplifier. You cannot
operate the following steps with the headphones
connected.
operate the following steps with the headphones
connected.
20
Press .
[Auto Calibration] starts.
The system adjusts the speaker setting
automatically.
Be quiet during the measurement.
The system adjusts the speaker setting
automatically.
Be quiet during the measurement.
Note
• Loud test sound is output when [Auto
Calibration] starts. You cannot turn the volume
down. Give consideration to children and
neighbors.
down. Give consideration to children and
neighbors.
• Before [Auto Calibration], install the surround
amplifier in the appropriate location. If you
install the surround amplifier in an improper
location, such as another room, proper
measurement will not be obtained.
install the surround amplifier in an improper
location, such as another room, proper
measurement will not be obtained.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interfere with
measurement.
takes about 1 minute), as it may interfere with
measurement.
• When you use the surround back speakers with
the optional surround amplifier, install the
speakers in appropriate location and turn the
surround amplifier on.
speakers in appropriate location and turn the
surround amplifier on.
21
Confirm the conclusions of [Auto
Calibration].
Calibration].
The conclusions appear on the TV screen.
Press
Press
C/c to change the page. The first page
shows the distance of speakers. The second
page shows the level of speakers. If the
conclusions are ok, unplug the calibration
mic and press
page shows the level of speakers. If the
conclusions are ok, unplug the calibration
mic and press
X/x to select [OK].
Note
• The environment of the room in which the
system is installed may affect measurements.
• If measurement fails, follow the message then
retry [Auto Calibration].
22
Press .
Easy Setup is finished. All connections and
setup operations are complete.
setup operations are complete.
To quit the Easy Setup
Press HOME in any Step.
Tip
• If you change the position of the speakers, reset the
speaker settings. See “Calibrating the Appropriate
Settings Automatically” (page 108) and “Setting the
Speakers” (page 110).
Settings Automatically” (page 108) and “Setting the
Speakers” (page 110).
• If you want to change any of the settings, see
To recall the Easy Setup Display
1
Press HOME.
The home menu appears on the TV screen.
2
Press
C/c to select
[Setup].
3
Press
X/x to select [Easy Setup], then
press .
4
Press
C/c to select [Start], then press
.
The Easy Setup display appears.