Sony STR-SL7 매뉴얼

• Point the remote at the remote sensor   on the

receiver.

• Remove any obstacles in the path between the

remote and the receiver.

• Replace both batteries in the remote with new

ones, if they are weak.

• Make sure you select the correct function on the

remote.

• If the remote is set to operate the TV only, use

the remote to select a source or component other
than TV before operating the receiver or other
component.

All memorized settings

page  13

Customized sound fields

page  23

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION

with 8 ohm loads both channels driven, from
120 Hz – 10 kHz; rates 100 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.

POWER OUTPUT
Rated Power Output at Stereo mode
(8 ohms 1 kHz, THD 0.09 %)

80 W + 80 W

Reference Power Output
(THD 0.3%)

Front

1)

: 80 W/ch

Center

1)

: 80 W

Surround

1)

: 80 W/ch

1) Depending on the sound field settings and the

source, there may be no sound output.

Frequency response
MICRO SP.:

150 Hz – 20 kHz
0/–3 dB
150 Hz (6 dB/oct)
Low cut Filter ON

NORMAL SP.:

20 Hz – 20 kHz
+/–0.5 dB

Sensitivity: 250 mV
Impedance: 50 kilohms
S/N

2)

: 95 dB

(A, 20 kHz LPF,
250 mV

3)

)

2) INPUT SHORT.
3) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial)

Sensitivity: –
Impedance: 75 ohms
S/N: 95 dB
(A, 20 kHz LPF)

TV, AUX (Optical)

Sensitivity: –
Impedance: –
S/N: 95 dB
(A, 20 kHz LPF)

Outputs
FRONT L/R, CENTER, SURROUND L/R,
SUB WOOFER

Voltage: 2 V
Impedance: 1 kilohms

Inputs
S-video:

Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms

Outputs
S-video:

Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms

87.5 – 108.0 MHz

75 ohms, unbalanced

10.7 MHz

Mono:  18.3 dBf,

2.2 µV/75 ohms

Stereo:  38.3 dBf,

22.5 µV/75 ohms

11.2 dBf, 1 µV/75 ohms

Mono:  76 dB
Stereo:  70 dB

Mono:  0.3%
Stereo: 0.5%

45 dB at 1 kHz

30 Hz – 15 kHz
+0.5/–2 dB

60 dB at 400 kHz