Sony CDP-CA9ES 사용자 설명서
Recording From CDs
13
Recording From CDs
Recording Your Own Program
You can record the program you’ve created on a tape,
DAT or MD. The program can contain up to 32 tracks.
By inserting a pause during programming, you can
divide the program into two for recording on both
sides of a tape.
DAT or MD. The program can contain up to 32 tracks.
By inserting a pause during programming, you can
divide the program into two for recording on both
sides of a tape.
Fading In or Out
You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
Number
buttons
buttons
FADER
RM-D645 for CDP-CA9ES
FADER
RM-D515 for CDP-CA8ES
Number
buttons
buttons
To
Start play fading in
End play fading out
Changing the fading time
You can change the fading time from 2 to 10 seconds
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.
1
Press FADER before you start playing.
“FADE 5 SEC” appears in the display.
2
While the fading time “5” is flashing, press the
number button to specify the fading time.
Press FADER
During pause. The Q indication
flashes and play fades in.
flashes and play fades in.
When you want to start fading out.
The q indication flashes. The play
fades out and the player pauses.
The q indication flashes. The play
fades out and the player pauses.
DISC 1 – 5
(
PROGRAM
Number buttons
>10
P
1
Create your program (for side A when recording
on a tape) while checking the total playing time
indicated in the display.
Follow Steps 1 to 4 in “Creating Your Own
Program” on page 11.
The
on a tape) while checking the total playing time
indicated in the display.
Follow Steps 1 to 4 in “Creating Your Own
Program” on page 11.
The
A
indication appears in the display.
2
When you record on both sides of the tape, press
P to insert a pause.
The “P” and
P to insert a pause.
The “P” and
A
B
indications appear in the display
and the playing time is reset to “0.00.”
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can program up to 31 tracks when you insert a
pause.
pause.
3
Repeat Steps 2 to 4 in “Creating Your Own
Program” on page 11 to create the program for
side B.
Program” on page 11 to create the program for
side B.
4
Start recording on the deck and then press ( on
the player.
When you record on both sides of the tape, the
player pauses at the end of the program for side A.
the player.
When you record on both sides of the tape, the
player pauses at the end of the program for side A.
5
When you record on side B, reverse the tape and
press ( or P on the player to resume playing.
press ( or P on the player to resume playing.
You can check the total playing time while
programming (Program Edit)
programming (Program Edit)
To select a track, press ≠ or ± and check the total
playing time. Then press PROGRAM to confirm your
selection.
playing time. Then press PROGRAM to confirm your
selection.
To check and change your program
See page 12.
The
The
A
indication appears while checking the program
for side A and
B
while checking the program for side
B.