JVC RX-DP10VBK 사용자 설명서
27
Sub-Room Operations
This section explains only the operations used when you play a sound source in the sub-room.
See pages 20 to 26 for the main room operations.
•
See pages 20 to 26 for the main room operations.
•
Before performing sub-room operations, it is recommended to finish the basic settings on pages 33 to 40.
IMPORTANT:
Check to see if the following before or while using the buttons and
controls.
controls.
For the sub-room operations:
The SUB ROOM ON/OFF lamp on the unit is lit.
• When using the unit:
– “SUB ROOM” is shown in the main display.
– Press DOOR DOWN to use the buttons inside the
– Press DOOR DOWN to use the buttons inside the
front door.
To close the front door, press DOOR UP.
To close the front door, press DOOR UP.
• When using the remote control:
When operating the receiver using the remote control, the
display on the unit always shows the main room source
information though you are operating it for the sub-room
source.
display on the unit always shows the main room source
information though you are operating it for the sub-room
source.
– Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector
to “SUB ROOM.”
– Check the indication shown on the remote’s display when you
press a button—this indicates the remote control operation mode
together with multi-room operation mode (either MAIN ROOM or
SUB ROOM) for a while (10 or 5 seconds).
together with multi-room operation mode (either MAIN ROOM or
SUB ROOM) for a while (10 or 5 seconds).
DOOR
DOWN
Ex. When you press FM with
MAIN ROOM/SUB ROOM (LEARN/TRANSMIT)
selector set to “SUB ROOM.”
selector set to “SUB ROOM.”
ON/OFF
ON/OFF
SUB ROOM
TRANSMIT
LEARN
MAIN ROOM
SUB ROOM
MAIN ROOM
SUB ROOM
STANDBY/ON
STANDBY/ON
STANDBY
TV/CATV/DBS
VCR 1
ON
SUB ROOM
TRANSMIT
LEARN
MAIN ROOM
Turning the Power On and Off (Standby)
and Selecting the Sub-Room Operations
and Selecting the Sub-Room Operations
On the unit:
1. Press
(STANDBY/ON).
The STANDBY lamp goes off, and the MAIN ROOM ON/OFF
lamp lights up.
The front door moves down so that the source selecting buttons
appear.
• The unit is now activated only for the main room operations.
lamp lights up.
The front door moves down so that the source selecting buttons
appear.
• The unit is now activated only for the main room operations.
The currently selected speakers 1 and/or 2 indicator(s) light(s)
up on the display.
up on the display.
2. Press SUB ROOM ON/OFF so that
the SUB ROOM ON/OFF lamp lights
up.
up.
• When connecting the sub-room front
speakers to the FRONT 2/SUB ROOM SPEAKERS
terminals, see also “Preparing for the Sub-Room
Operations—SUB ROOM” on page 40, and “Activating the
Sub-Room Front Speakers” on page 30.
terminals, see also “Preparing for the Sub-Room
Operations—SUB ROOM” on page 40, and “Activating the
Sub-Room Front Speakers” on page 30.
3. Press SUB ROOM CONTROL
(inside the front door) so that “SUB
ROOM” and the previously selected sub-
room source name appear on the display.
ROOM” and the previously selected sub-
room source name appear on the display.
Now the buttons and controls on the unit work for the sub-room
operations.
• Each time you press the button, the buttons and controls on the
operations.
• Each time you press the button, the buttons and controls on the
unit are activated or deactivated for the sub-room operations.
S-V
IDE
O
VID
EO
VID
EO
AU
DIO
L
R
PUSH
-O
PEN
SP
EA
KER
S 1
IN
PU
T M
OD
E
SP
EA
KE
RS
2
DS
P M
OD
E
SU
RR
OU
ND
ON
/ O
FF
HT
X
ON
/ O
FF
SO
UN
D
SE
LEC
TO
R
RE
C
SE
LEC
TO
R
INP
UT
AT
T
LIN
E D
IR
EC
T
AD
JU
ST
M
EN
U
SE
TU
P
ME
NU
DO
W
N
LE
FT
UP
RIG
HT
SE
T
EX
IT
AU
DIO
/VID
EO
CO
NT
RO
L R
EC
EIV
ER
DV
D
DV
D M
ULT
I
VT
R 1
VT
R 2
TV
/ D
BS
VID
EO
CD
PH
ON
O
TAP
E / M
D
CD
R
TU
NE
R
EX
T 7
.1C
H
STAN
DB
Y/O
N
STAN
DB
Y
PH
ON
ES
DIM
M
ER
CC CO
NVER
TER
MAIN
ROOM
ON
/OF
F
SU
B R
OOM
ON
/OF
F
DO
OR
UP
DO
OR
DO
W
N
MA
STE
R
VO
LUME
D
I
G
I
T
A
L
D
I G
I T
A
L
S U
R R
O
U N
D
RX
-D
P1
0V
MAIN ROOM
ON/OFF
STANDBY / ON
STANDBY
L
ANALOG
SPEAKERS
VOLUME
1
SUBWFR
R
dB
SUB ROOM
ON/OFF
The volume
level appears.
level appears.
The last Surround/DSP mode or
other information appears.
other information appears.
The last main room source is activated.
SPEAKERS
VOLUME
SUB ROOM
1
dB
The sub-room volume
level appears.
level appears.
The last sub-room
source appears.
source appears.
SUB ROOM
CONTROL
To use the sub-room TV (connected to the SUB ROOM
MONITOR OUT jack)
Turn on the TV and select the correct input for this receiver
manually.
MONITOR OUT jack)
Turn on the TV and select the correct input for this receiver
manually.
For those who connect the sub-room front speakers to the
SUB ROOM PREOUT jacks using another amplifier (see
page 17).
You have to determine how to adjust the volume level through the
sub-room front speakers. (See “Preparing for the Sub-Room
Operations—SUB ROOM” on page 40 for more details.)
SUB ROOM PREOUT jacks using another amplifier (see
page 17).
You have to determine how to adjust the volume level through the
sub-room front speakers. (See “Preparing for the Sub-Room
Operations—SUB ROOM” on page 40 for more details.)
To use the sub-room front speakers
1 Turn on the other amplifier connected to the SUB ROOM
1 Turn on the other amplifier connected to the SUB ROOM
PREOUT jacks.
2 Adjust the volume level through sub-room front speakers either
on the other amplifier or on this receiver (depending on the
SUB PREOUT setting on the SUB ROOM submenu).
SUB PREOUT setting on the SUB ROOM submenu).
EN17-30_RX-DP10VBK[J]_f
01.6.19, 1:13 PM
27