JVC UX-GD7 사용자 설명서

 

• To enjoy the progressive video picture, connect a TV with 

the progressive video input using component video cord. 

 

• If you store a new station into an occupied preset number, 

the previously stored station in that number will be erased.

• When you unplug the AC power cord or a power failure 

occurs, the preset stations will be erased in a few days. If 
this happens, preset the stations again.

 

• When using an 8 cm disc, place it on the inner circle of the 

disc tray.

• On some DVD, SVCD, or VCD discs, the actual operations 

may be different from what is explained in this manual, due 
to the programming and disc structure; such differences are 
not malfunction of this System.

• When discs* in more than one tray are loaded on the disc 

trays, they are played in sequence as follows. (When DVD 
Video, DVD Audio or SVCD/VCD with PBC is loaded in 
the System, playback of the disc next to these discs will not 
start.):
Ex.: When DISC 2 is selected:

DISC 2

]

 

DISC 3

]

 

DISC 4

]

 

DISC 5

]

 

DISC 1

]

 

(then stops)

* When no disc is loaded on the disc tray, the disc number 

is skipped.

• You can exchange discs while playing or selecting another 

disc.

• Some DVD Audio discs prohibit downmixed output. When 

you play back such a disc, “LR ONLY” appears on the 
display and the System plays back the left front and right 
front signals.

• 3D Phonic setting is also applied to the optical digital 

output signals through the OPTICAL DIGITAL OUT 
terminal.

• For DVD-VR playback...

– When making a disc, use the UDF-Bridge format.
– For details about DVD-VR format and play list, refer to 

the manual of the recording equipment.

– If you use a DVD-RAM with a cartridge, take the disc 

out of the cartridge before inserting.

– You cannot use reverse slow motion, Program Play, and 

Random Play.

• For DivX playback...

– The System supports DivX 5.x, 4.x and 3.11.
– The System supports the DivX files whose resolution is 

720 x 480 pixels or less (30 fps), and 720 x 576 pixels or 
less (25 fps).

– Audio stream should conform to MPEG 1 Audio Layer-

2 or MPEG 1 Audio Layer-3 (MP3).

– The System does not support GMC (Global Motion 

Compression).

– The file encoded in the interlaced scanning mode may 

not be played back correctly.

– The System has its own Registration code for DivX 

playback.

– If necessary, you can confirm the Registration code of 

your System (see page 38).

• For MP3/JPEG playback...

– This System cannot play “packet write” discs.
– MP3/JPEG discs require a longer readout time than 

regular CDs. (It depends on the complexity of the group/
file configuration.)

– Some MP3/JPEG files cannot be played back and will be 

skipped. This results from their recording processes and 
conditions.

– When making MP3 discs, use ISO 9660 Level 1 or Level 

2 for the disc format.

– This System can play back MP3/JPEG files with the 

extension code <.mp3> or <.jpg> (regardless of the letter 
case—upper/lower).

– It is recommended that you make each MP3 file at a 

sampling rate of 44.1 kHz and at a bit rate of 128 kbps. 

– This System can recognize the total of 1000 tracks and of 

99 groups (each group can contain up to 150 tracks). 
Those exceeding the maximum number cannot be 
recognized.

– This System can show up to 23 characters of the file 

(track) names (except for extension) and 30 characters of 
the ID3 tags on the display and the TV screen.

– Some characters or symbols will not be shown (and will 

be blanked) on the display.

• When using Resume on SVCD or VCD with PBC, the 

playback might start on a position slightly different from 
where you have stopped.

• You can use Resume only for the DVD/SVCD/VCD/DivX 

except for some discs—depending how the disc is 
programmed.

 

• Check if your PC equipped with the CD-ROM drive is 

running on Windows

R

 

 98*, Windows

R

 

 98SE*, Windows

R

 

 

Me*, Windows

R

 

 2000*, or Windows

R

 

 XP* and prepare its 

CD-ROM.

• DO NOT turn off the System or disconnect the USB cable 

while installing the drivers and for several seconds each 
time you PC is recognizing the System.

• Use a full speed USB cable (version 1.1).
• If your PC does not recognize the System, disconnect the 

USB cable and connect it again. If this does not work, 
restart Windows.

• The drivers installed can be recognized only when the USB 

cable is connected between the System and your PC.

UX-GD7[B]_EN.book Page 40 Wednesday, April 20, 2005 4:59 PM