JVC SP-UXG200 사용자 설명서

The disc does not play.
] The disc is placed upside down. Place the disc with the label 

side up.

The disc sound is discontinuous.
] The disc is scratched or dirty.

The Daily Timer does not work.
] The System has been turned on when the on-time comes. 

The Daily Timer starts working only when the System is 
turned off.

] There might have been a power failure. Set the clock first, 

then the timer again.

“INVALID” appears on the display.
] On-time and off-time are set to the same time. Set the 

different time for on-time and off-time.

To get the best performance of the System, keep your discs, 
and mechanism clean.

• When removing the disc from its case, hold it at the edge while 

pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc.
• Avoid exposure to direct sunlight, temperature extremes, and 

moisture.

To clean the disc:
Wipe the disc with a soft cloth in a straight line from center to 
edge.

• Do not touch the USB connector.
• Be careful not to damage the USB connector.
• Put the USB connector in the cover or slide in the USB unit 

after use to prevent breaking.

• Stains should be wiped off with a soft cloth. If the System is 

heavily stained, wipe it with a cloth soaked in water-diluted 
neutral detergent and wrung well, then wipe clean with a dry 
cloth.

• Since the System may deteriorate in quality, it become 

damaged or get its paint peeled off, be careful about the 
following:
– DO NOT wipe it with a hard cloth.
– DO NOT wipe it strongly.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as insecticides 

to it.

– DO NOT allow any rubber or plastic to remain in contact for 

a long time.

UX-G200[J].BOOK  Page 20  Tuesday, December 2, 2008  3:05 PM